|
02-10-2009, 06:00 AM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2009
Posts: 18
|
microswitch id please
'88 Marathon gas unit.
There is a microswitch located inside the "firewall" where the throttle pedal linkage comes in to the engine compartment. Can anyone advise what this switch is and what it does. The linkage on mine is adjusted out to where it doesn't touch and the wire that plugs into the top side is unhooked. Oh by the way, the cart won't crank either. Thanks for the good info I know I'll get. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-10-2009, 06:58 AM
|
#2 |
|
Gone Wild
Join Date: Jan 2008
Location: Lowndes County Ga.
Posts: 343
|
Re: microswitch id please
That's your starter switch , they sometimes come with spacers on the mounting bolts to line them up with the linkage . somewhere on this site there is a wiring diagram to show where the wires go .
If the spacers are gone I think they are also available from the site sponcer or you could fabricate them from a plastic sink or commode supply line . |
|
|
|
|
02-10-2009, 06:58 AM
|
#3 |
|
Gone Wild
Join Date: Nov 2007
Location: OKOBOJI, IA.
Posts: 247
|
Re: microswitch id please
the micro switch works like a toggle switch.
gotta have it! hook it up it'll run good luck, dew |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| V glide microswitch | Electric Club Car | |||
| 1985 EZGO microswitch bad? | Gas EZGO | |||
| i just took apart my first microswitch | Electric EZGO | |||
Linear Mode
