Steering feels loose after lift

[Fairtax4me]

Originally Posted by firemanrick

What’s your thoughts on addressing one the driver side wheel being further in than the passenger is? Also, there’s just not enough adjustment in the camber bolt to straighten out the wheels


Sent from my iPhone using Tapatalk

For the camber angle
You loosen the 4 bolts that secure the spring to the frame so the spring can move. Turn the eccentric bolt and it will slide the spring one way or the other to adjust the position of the leaf spring side to side so the camber is equal. Use a large square or straightedge held against the stop of the tire on each side. Adjust the spring side to side until the tires have an equal gap on each side at the bottom of the straight edge. It only moves about 3/8" total, so if the bolt will not turn far enough to make the camber on each tire equal, then you'll need to persuade the lift block and spring to one side or the other with some taps from a hammer.

[firemanrick]

There’s just not enough adjustment to get them straight. They’re close, but not perfect. But it’s handling a lot better now that I got the front wheels facing the same direction so I’ll take that as a win


Sent from my iPhone using Tapatalk

[RED 92CC GAS]

I use adjustable curtain rod adjust to front of wheel then check back of wheel should be 1/4 in. Play.