|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
02-03-2020, 08:29 AM
|
#21 |
|
Not Yet Wild
Join Date: Dec 2019
Posts: 1
|
Re: Question on my Alltrax install
Scotty is The Master...the Svengali of All Things Electrical....listen to this guy ..! He was my Consigliere and I could not have completed my project without his wisdom and help.
Dave Pasahow |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-03-2020, 09:12 AM
|
#22 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Question on my Alltrax install
There is an inline fuse in the drivers side of the controller/motor bay. A few carts required a bigger (10a) fuse installed when the Alltrax was installed.
|
|
|
|
|
02-03-2020, 11:07 AM
|
#23 |
|
Not Yet Wild
Join Date: Oct 2019
Location: Western PA
Posts: 16
|
Re: Question on my Alltrax install
When I installed my Alltrax a few months ago, I had similar symptoms. I had the diode on the solenoid backwards. I corrected that, and no problems since.
|
|
|
|
|
02-03-2020, 11:50 AM
|
#24 | |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Question on my Alltrax install
Quote:
|
|
|
|
|
|
02-03-2020, 12:08 PM
|
#25 |
|
Not Yet Wild
Join Date: Jan 2020
Location: Donna Tx
Posts: 74
|
Re: Question on my Alltrax install
No diode installed right now. Checked my 400 amp solenoid buy jumpering to the battery and it clicks so not an actual solenoid problem but something failing to actuate it.
|
|
|
|
|
02-03-2020, 12:42 PM
|
#26 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Question on my Alltrax install
For the sake of the archives.
Check the (ignition) fuse from the rear of the cart it is in the harness on the lower left side of the motor bay. |
|
|
|
|
02-03-2020, 01:35 PM
|
#27 |
|
Not Yet Wild
Join Date: Jan 2020
Location: Donna Tx
Posts: 74
|
Re: Question on my Alltrax install
Ok guys just got off the phone with Alltrax. They helped me check the controller with the laptop and the Alltrax is bad. Crap. Now take it apart and send it in to be repaired.
|
|
|
|
|
02-03-2020, 02:18 PM
|
#28 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Question on my Alltrax install
I'm sorry to hear that... I was worried once you found the fuse and it was good but, yes the controller does handle half of the solenoid activation circuit so it can shut the cart down if it senses a dangerous situation electrically... Glad they are taking care of this, let me know if I can help
|
|
|
|
|
02-03-2020, 04:53 PM
|
#29 |
|
Not Yet Wild
Join Date: Jan 2020
Location: Donna Tx
Posts: 74
|
Re: Question on my Alltrax install
Just excited it's figured out. Seemed everything was connected correctly so very confusing. As they say Sh#t happens. :)
|
|
|
|
|
02-03-2020, 07:41 PM
|
#30 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Question on my Alltrax install
 Yeah. If you make enough of them sooner or later you get a bad one. Most likely they will replace it - very quickly. |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Alltrax XCT PDS Install question | Electric EZGO | |||
| Alltrax XCT500 install question | Electric EZGO | |||
| alltrax install question HELP!!! | Electric EZGO | |||
| New Alltrax TXT48300 install question/issue | Electric EZGO | |||
| Alltrax XCT Install Question | Electric EZGO | |||
Linear Mode
