controller compatability question

jamoore · 02-11-2020, 07:52 AM

I have 2 Yamaha 2006, G22's. One has a bad controller. The numbers on these controllers are JU2-H6510-30 and 31. Does anyone know if a JW2-H6510-01 controller will work on this cart. They physically look the same. I don't want to invest a lot trying to get this cart figured out since I am planning on selling it. I also am pretty sure there are other issues beyond the controller I will need to address. I think I could get the used, take off JW controller reasonably if it is compatible and work on the other issues from there.

Altster · 02-11-2020, 08:32 AM

I believe the connector is different. Pins are on a diff. Position. If you can make an adapter it should work i think

Verstuurd vanaf mijn SM-G973F met Tapatalk

jamoore · 02-11-2020, 09:57 AM

Thanks, figures it would be different. I don't think I would attempt an adaptor. Appreciate the feedback.

cgtech · 02-11-2020, 02:21 PM

Jw2 controller is for yamaha drive & will not work with G22, even with an "adapter cable". The G22 uses 0-5,000 ohm throttle type, and Drive uses 0-5v throttle type, not compatible.

jamoore · 02-11-2020, 08:42 PM

Thank you sir, you are an amazing wealth of info and have helped me out in the past with advice and I have seen countless other posts where you supplied invaluable assistance. That is what I love about this site. Thank you again, Joe

02-11-2020, 07:52 AM	#1
jamoore Gone Wild Join Date: Jul 2019 Location: Newport News, VA Posts: 155	controller compatability question I have 2 Yamaha 2006, G22's. One has a bad controller. The numbers on these controllers are JU2-H6510-30 and 31. Does anyone know if a JW2-H6510-01 controller will work on this cart. They physically look the same. I don't want to invest a lot trying to get this cart figured out since I am planning on selling it. I also am pretty sure there are other issues beyond the controller I will need to address. I think I could get the used, take off JW controller reasonably if it is compatible and work on the other issues from there.

02-11-2020, 08:32 AM	#2
Altster Not Yet Wild Join Date: Jan 2020 Posts: 29	Re: controller compatability question I believe the connector is different. Pins are on a diff. Position. If you can make an adapter it should work i think Verstuurd vanaf mijn SM-G973F met Tapatalk
Altster Not Yet Wild Join Date: Jan 2020 Posts: 29

02-11-2020, 09:57 AM	#3
jamoore Gone Wild Join Date: Jul 2019 Location: Newport News, VA Posts: 155	Re: controller compatability question Thanks, figures it would be different. I don't think I would attempt an adaptor. Appreciate the feedback.

02-11-2020, 02:21 PM	#4
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: controller compatability question Jw2 controller is for yamaha drive & will not work with G22, even with an "adapter cable". The G22 uses 0-5,000 ohm throttle type, and Drive uses 0-5v throttle type, not compatible.

02-11-2020, 08:42 PM	#5
jamoore Gone Wild Join Date: Jul 2019 Location: Newport News, VA Posts: 155	Re: controller compatability question Thank you sir, you are an amazing wealth of info and have helped me out in the past with advice and I have seen countless other posts where you supplied invaluable assistance. That is what I love about this site. Thank you again, Joe

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Compatability	Gas Club Car
Wheel Compatability	Electric EZGO
Wheel compatability	Electric Yamaha
Ez Go Motor Compatability	Electric EZGO
Charger compatability	Electric EZGO