|
|
|||||||
| Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
04-25-2020, 12:59 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2020
Posts: 7
|
yamaha golf cart 48 volt wont move
Put new controler in still dont move and buzzer for reverce does not come on when switch is switch.but does work
tow switch is working turn headlight on flip switch they go out. turn key on and flip switch to run and check power at selonord and red wire is hot but no ground . Shut key off and red wire has no power on selonold check switch on brake ok looks like lost ground  |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-25-2020, 01:12 PM
|
#2 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: yamaha golf cart 48 volt wont move
Ground isnt "lost", it's not being provided by the controller like its supposed to be when the controller commands the solenoid on. The key switch, gas pedal, f&r dont directly control the solenoid, they just inform the controller of what you want to do, then controller activates solenoid B-.
|
|
|
|
|
04-25-2020, 01:38 PM
|
#3 |
|
Not Yet Wild
Join Date: Apr 2020
Posts: 7
|
Re: yamaha golf cart 48 volt wont move
Ok where should i go from here what should i test ?
|
|
|
|
|
04-25-2020, 01:38 PM
|
#4 |
|
Not Yet Wild
Join Date: Apr 2020
Posts: 7
|
Re: yamaha golf cart 48 volt wont move
did check the fuse its ok so what is not getting power ? Bad Wiring ?what im trying to say is whats not turning on the selonord
|
|
|
|
|
04-25-2020, 05:08 PM
|
#5 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: yamaha golf cart 48 volt wont move
Controller is not providing the B- signal. Does solenoid click (or is B- supplied, check both ways) just after tow/run switched on? When the cart is pushed?
|
|
|
|
|
04-25-2020, 05:10 PM
|
#6 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: yamaha golf cart 48 volt wont move
Was "new controller" actually new, or used? OEM original controller or aftermarket?
|
|
|
|
|
04-26-2020, 08:23 AM
|
#7 |
|
Not Yet Wild
Join Date: Apr 2020
Posts: 7
|
Re: yamaha golf cart 48 volt wont move
new new controller and solenoid does not click tested solenoid ok
|
|
|
|
|
04-26-2020, 10:39 AM
|
#8 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: yamaha golf cart 48 volt wont move
Which fuse did you find? Should have been a 3a, or you didnt find the right fuse.
|
|
|
|
|
04-26-2020, 02:02 PM
|
#9 |
|
Not Yet Wild
Join Date: Apr 2020
Posts: 7
|
Re: yamaha golf cart 48 volt wont move
yes looking in the back of the cart on the left side fuse holder 3 amp fuse
 |
|
|
|
|
04-27-2020, 08:47 AM
|
#10 |
|
Not Yet Wild
Join Date: Apr 2020
Posts: 7
|
Re: yamaha golf cart 48 volt wont move
Anybody have any Idears where i should look
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Golf Cart Wont Move | Electric EZGO | |||
| 92 club car electric golf cart wont move | Electric Club Car | |||
| 1992 ezgo marathon golf cart wont move | Gas EZGO | |||
| Golf cart will start but wont move | Gas EZGO | |||
| golf cart wont move | Electric EZGO | |||
Linear Mode
