G29 panel and body Rivets/Pins

[gable74]

Does anyone sell a pack of these to replace all the rivets on a G29? If not, does anyone know a quantity and type to do an entire first gen g29 (2010)?

I am planning on removing the body and side panels for paint. I will need to remove the wheel liners and floor mat as well. I would like to replace these areas with new rivets and or Christmas tree pins.

Thanks,

[cgtech]

Heres a link to help you get the correct stuff (and the diagrams will help you remove the panels more easily). Pay attention to the quantities used, the part number is for 1, not a whole pack...

https://www.shopyamaha.com/parts-catalog/lines/golfcar

[gable74]

Thanks! I will get the list put together. Wish there was a way to cross reference the Yamaha part numbers with less expensive off the shelf parts.

[gable74]

For my year G29, and I would assume all years are the same 07 - 16, here is the rivet part numbers and quantities. This covers ALL body panels, front, rear, sides, floor mat, inner fenders, etc. I HAVE NOT included actual metal screws/fasteners as they should all be reusable.

90267-63047-00 qty. 5
90269-07001-00 qty. 5
JW1-K7329-00-00 qty. 5
JW1-K7449-00-00 qty. 6
90269-06804-00 qty. 15
90269-08813-00 qty. 11
90267-60840-00 qty. 3

Cost in cart before shipping is $59 through Partzilla.

Would be nice to get specs on these parts and be able to cross reference with off the shelf stuff and save a lot of money.

Thanks for the link @cgtech

[cgtech]

Originally Posted by gable74

For my year G29, and I would assume all years are the same 07 - 16, here is the rivet part numbers and quantities. This covers ALL body panels, front, rear, sides, floor mat, inner fenders, etc. I HAVE NOT included actual metal screws/fasteners as they should all be reusable.

90267-63047-00 qty. 5
90269-07001-00 qty. 5
JW1-K7329-00-00 qty. 5
JW1-K7449-00-00 qty. 6
90269-06804-00 qty. 15
90269-08813-00 qty. 11
90267-60840-00 qty. 3

Cost in cart before shipping is $59 through Partzilla.

Would be nice to get specs on these parts and be able to cross reference with off the shelf stuff and save a lot of money.

Thanks for the link @cgtech

You would assume incorrectly... there were some changes over the years..

[cgtech]

Originally Posted by gable74

Thanks! I will get the list put together. Wish there was a way to cross reference the Yamaha part numbers with less expensive off the shelf parts.

I work at a dealer, and my ocd dislikes incorrect clips & fasteners, so I can't help you find "some other ones that might work".

[gable74]

Originally Posted by cgtech

I work at a dealer, and my ocd dislikes incorrect clips & fasteners, so I can't help you find "some other ones that might work".

Originally Posted by cgtech

You would assume incorrectly... there were some changes over the years..

lol.....well then what I have provided is a good jumping off point for anyone needing rivets. Should be 90% of the way there anyway.

Thanks,