Yamaha g16 Build

petewilliams · 07-05-2010, 10:48 AM

great job..... thanks for the pic

smallblock450sl · 07-05-2010, 12:46 PM

Quote:

Originally Posted by Mike Mac

I painted mine, may want to check out my signature for ideas!
Mike

Now that's what I call "before and after" pic's

Nice job Mike

Dave in VA · 07-05-2010, 01:33 PM

Mike--very nice engine detail. I like the black seats--where did you get them?

Mike Mac · 07-06-2010, 08:33 AM

Thanks for the comments guys.
Dave the seats are gray to match the cyber gray matalic stripe paint. Had them done at a local upholstry shop. For what I understand, there are not to many grays(4 or 5), and I got lucky!
Thanks again, Mike

petewilliams · 07-28-2010, 06:05 AM

Finally got wires and rims yesterday. I have a couple more things to button up but I hope to be riding this weekend. Man the wheels and tires really make this this sweet. oh ya and new seats covers!

Mike Mac · 07-28-2010, 07:38 AM

Looks great Pete, how does it drive? Like the tire/wheel combo! Ya tires really make them ride great!
What color yellow did you use, and is it black on the stripe or a matalic?
Nice job!! Mike

petewilliams · 07-28-2010, 07:51 AM

I still have to put the motor back in. I am lookin to do that today after work and I'll let u know.

petewilliams · 07-28-2010, 08:10 AM

Do you have photo? dad

petewilliams · 07-28-2010, 04:24 PM

I installed the motor this afternoon. first the choke cable is a little short cause of the lift. second its smokin. after it warms up I was going to check the carb float and take it from there. also the engine wouldn't shut off. when I took my foot off the gas and also when I turned the key. I got a little electrical work...

.. but I took it for a ride and its smooth and man I like the clearance I was drivin everywhere. if anyone has any insite about my problems let me know.. electrical diagram??
Thanks

Dave in VA · 07-28-2010, 04:40 PM

Maybe the micro-switch under the gas pedal is out of adjustment? Just guessing.

07-05-2010, 10:48 AM	#21
petewilliams Not Yet Wild Join Date: Sep 2009 Posts: 63	Re: Yamaha g16 Build great job..... thanks for the pic
petewilliams Not Yet Wild Join Date: Sep 2009 Posts: 63

07-05-2010, 01:33 PM	#23
Dave in VA maintaining a low profile Join Date: Oct 2009 Location: SW Virginia USA Posts: 6,314	Re: Yamaha g16 Build Mike--very nice engine detail. I like the black seats--where did you get them?

07-06-2010, 08:33 AM	#24
Mike Mac G8 Specialist Join Date: Jun 2009 Location: Phoenix Posts: 7,799	Re: Yamaha g16 Build Thanks for the comments guys. Dave the seats are gray to match the cyber gray matalic stripe paint. Had them done at a local upholstry shop. For what I understand, there are not to many grays(4 or 5), and I got lucky! Thanks again, Mike

07-28-2010, 07:38 AM	#26
Mike Mac G8 Specialist Join Date: Jun 2009 Location: Phoenix Posts: 7,799	Re: Yamaha g16 Build Looks great Pete, how does it drive? Like the tire/wheel combo! Ya tires really make them ride great! What color yellow did you use, and is it black on the stripe or a matalic? Nice job!! Mike

07-28-2010, 07:51 AM	#27
petewilliams Not Yet Wild Join Date: Sep 2009 Posts: 63	Re: Yamaha g16 Build I still have to put the motor back in. I am lookin to do that today after work and I'll let u know.
petewilliams Not Yet Wild Join Date: Sep 2009 Posts: 63

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-28-2010, 08:10 AM	#28
petewilliams Not Yet Wild Join Date: Sep 2009 Posts: 63	Re: Yamaha g16 Build Do you have photo? dad
petewilliams Not Yet Wild Join Date: Sep 2009 Posts: 63

07-28-2010, 04:24 PM	#29
petewilliams Not Yet Wild Join Date: Sep 2009 Posts: 63	Re: Yamaha g16 Build I installed the motor this afternoon. first the choke cable is a little short cause of the lift. second its smokin. after it warms up I was going to check the carb float and take it from there. also the engine wouldn't shut off. when I took my foot off the gas and also when I turned the key. I got a little electrical work... .. but I took it for a ride and its smooth and man I like the clearance I was drivin everywhere. if anyone has any insite about my problems let me know.. electrical diagram?? Thanks
petewilliams Not Yet Wild Join Date: Sep 2009 Posts: 63

07-28-2010, 04:40 PM	#30
Dave in VA maintaining a low profile Join Date: Oct 2009 Location: SW Virginia USA Posts: 6,314	Re: Yamaha g16 Build Maybe the micro-switch under the gas pedal is out of adjustment? Just guessing.

Similar Threads
Thread	Forum
Yamaha G9 build	Gas Yamaha
Yamaha G8 Build	Gas Yamaha
My Yamaha G19 Build	Design Center
Yamaha G14 Re-Build	Gas Yamaha
G-1 Yamaha Build	Gas Yamaha