2008 RXV wheel question/

Pats Fan Willy · 01-09-2013, 04:03 PM

Quote:

Originally Posted by lococummins

I think it will activate with 36 or 48 volts

So you want to turn off the power to the accessories after the converter?

lococummins · 01-09-2013, 04:21 PM

Quote:

Originally Posted by Pats Fan Willy

So you want to turn off the power to the accessories after the converter?

Depending on your reducer, it should have a "remote" wire. That would be where you want to cut of the power(on the way into the reducer not after).

Pats Fan Willy · 01-09-2013, 04:56 PM

Quote:

Originally Posted by lococummins

Depending on your reducer, it should have a "remote" wire. That would be where you want to cut of the power(on the way into the reducer not after).

Yeah i dont have a remote wire on the reducer. Thats why i have to use a relay.

lococummins · 01-09-2013, 05:07 PM

Quote:

Originally Posted by Pats Fan Willy

Yeah i dont have a remote wire on the reducer. Thats why i have to use a relay.

So yours only has 3 wires? Power in, Ground, and power out?

Pats Fan Willy · 01-09-2013, 05:28 PM

Quote:

Originally Posted by lococummins

So yours only has 3 wires? Power in, Ground, and power out?

The reducer is a 48v 25 amp reducer. Black and red on one side to connect to batteries and a blue and black on the other side for the output! No remote wire. Image attached is install instructions.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
2008 G29/ Drive Speed Question	Electric Yamaha
2008 Badboy Part question	Electric EZGO
Several Problems with 2008, recall question	Tomberlin
2008 precedent wiring question	Electric Club Car
2008 St Sport II Lift Question	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum