88 2 cycle exhaust wanted

robn05 · 05-13-2013, 08:52 AM

looking 4 header pipe to muffler. cannot find one anywhere. also what would a 1988 ezgo be called? rxv,txt? thanks gyz.

BrewCityMusic · 05-13-2013, 08:12 PM

I actually have one, and I know what You're going through - the one I have was on my cart and has a flat spot on the bottom from a great jump and a bad landing, wore a small hole in it which I JB Welded but never trusted (and of course, being as it was on the cart was too lazy and/or impatient to pull and weld, LOL) ....

I found another good used one on Ebay but You don't wanna know what it cost me (other than over a year waiting for it to come along, hahaha) - if You're really stuck, I could send You my old one for shipping costs and a six pack, PM me. You'll have to clean it up and weld a 1/16"X1/4" hole on the lower part, but other than that it's just fine - just throwing it out if You can't find yourself one that's ready to roll

Heliarc · 05-13-2013, 10:43 PM

I searched and searched, could not find one. I had to make my own. The exhaust guy helped me out on it by pre bending some pieces but they needed adjusted.

Golf cart exhaust - YouTube

05-13-2013, 08:52 AM	#1
robn05 Not Yet Wild Join Date: Mar 2013 Posts: 8	88 2 cycle exhaust wanted looking 4 header pipe to muffler. cannot find one anywhere. also what would a 1988 ezgo be called? rxv,txt? thanks gyz.
robn05 Not Yet Wild Join Date: Mar 2013 Posts: 8

05-13-2013, 08:12 PM	#2
BrewCityMusic Hammer Down !!!! Join Date: Jun 2010 Location: Lake Geneva, WI Posts: 2,681	Re: 88 2 cycle exhaust wanted I actually have one, and I know what You're going through - the one I have was on my cart and has a flat spot on the bottom from a great jump and a bad landing, wore a small hole in it which I JB Welded but never trusted (and of course, being as it was on the cart was too lazy and/or impatient to pull and weld, LOL) .... I found another good used one on Ebay but You don't wanna know what it cost me (other than over a year waiting for it to come along, hahaha) - if You're really stuck, I could send You my old one for shipping costs and a six pack, PM me. You'll have to clean it up and weld a 1/16"X1/4" hole on the lower part, but other than that it's just fine - just throwing it out if You can't find yourself one that's ready to roll

Similar Threads
Thread	Forum
New to me 1989 Marathon 2 cycle exhaust	Gas EZGO
88 2 cycle ezgo exhaust bolts	Gas EZGO
Wanted- marathon 4 cycle rear axle	Golf Carts and Parts
Wanted : marathon 4 cycle axle	Golf Carts and Parts
88 ezgo 2 cycle gas/oil mix coming out of exhaust	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum