|
|
|||||||
| Gas Club Car Gas DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
07-09-2014, 05:42 PM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2013
Posts: 4
|
Maching driven clutch on 92 ds with fe290.
Hello all, I have access to a machine shop and I would like to machine my driven clutch before I reinstall it. Can anyone tell me how much to remove and if I am to machine both halves of the clutch equally. I've already installed the new springs in both clutches as well as a new double cog belt. This looks to be relatively simple to do, I just need to know how much to machine. Thanks in advance.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-10-2014, 08:21 PM
|
#2 |
|
Gone Wild
Join Date: Dec 2007
Location: SE Indiana
Posts: 392
|
Re: Maching driven clutch on 92 ds with fe290.
I work at a machine shop and we did one a month ago on one of my carts. The max before the moveable sheeve bottoms out is .050. I took off .030 and it helped.
|
|
|
|
|
07-14-2014, 08:25 AM
|
#3 |
|
Not Yet Wild
Join Date: Mar 2013
Posts: 4
|
Re: Maching driven clutch on 92 ds with fe290.
Thanks for the reply. I appreciate it. As far as machining the cylinder head, have you done one of those as well. It looks like I can take around 25 thousandths and help raise the compression on my stock piston setup.
|
|
|
|
|
07-14-2014, 04:17 PM
|
#4 |
|
Gone Wild
Join Date: Dec 2007
Location: SE Indiana
Posts: 392
|
Re: Maching driven clutch on 92 ds with fe290.
I have not done this. I've seen some have taken up to .050
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Shimming a driven driven clutch | Gas EZGO | |||
| Where to buy a clutch 93 fe290 | Gas Club Car | |||
| 1997 Club Car DS FE290 Driven Clutch removal question | Gas Club Car | |||
| wtb cc fe290 carb driven clutch & ignitor | Golf Carts and Parts | |||
Linear Mode
