|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-03-2021, 10:42 PM | #1 |
Not Yet Wild
Join Date: Feb 2021
Location: Hunter Valley Australia
Posts: 40
|
G29 Solenoid Upgrade - Pre-Charge Resistor
Hi Guys, I've just replaced my stock solenoid with an MZJ-400 (I already have the Navitas 440 controller).
All seems well. I have used the diode that came with the solenoid but I kept the stock pre-charge resistor. My questions is - should I have replaced the stock resistor with the new resistor? Thanks. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Purpose of the solenoid pre-charge resistor on the precedent. | Electric Club Car | |||
2002 Electric Club Car DS (36-volt) Solenoid pre-charge resistor overheating | Electric Club Car | |||
Pre-Charge Resistor | Electric Club Car | |||
Pre-charge resistor for resistor carts? | Electric EZGO | |||
Resistor heat and Solenoid upgrade | Electric EZGO |