|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-28-2020, 02:49 PM | #11 |
Getting Wild
Join Date: Feb 2013
Location: Chesnee, SC
Posts: 120
|
Re: EzGo series TXT issues again
The white wire reads 1.5 at the click and 2.6 at full pedal. I also deleted the connection at the ITS and put in hearty shrink butt joints.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-28-2020, 03:26 PM | #12 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: EzGo series TXT issues again
Quote:
Replace it with an Alltrax SR48400 or larger. |
|
04-28-2020, 06:43 PM | #13 |
Getting Wild
Join Date: Feb 2013
Location: Chesnee, SC
Posts: 120
|
Re: EzGo series TXT issues again
Thank you for helping me confirm it!
|
05-03-2020, 09:41 AM | #14 |
Getting Wild
Join Date: Feb 2013
Location: Chesnee, SC
Posts: 120
|
Re: EzGo series TXT issues again
Johnnie, do you have a wiring schematic for the TXT key switch that includes lights on a second click?
|
05-03-2020, 09:52 AM | #15 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: EzGo series TXT issues again
Here's a wiring diagram for keyswitch with lights. As for a schematic, the two sets of contacts in that type keyswitch are entirely separate electrically and each respective set shows up on two different schematics (drive system & 12V accessories)
|
05-03-2020, 10:07 AM | #16 |
Getting Wild
Join Date: Feb 2013
Location: Chesnee, SC
Posts: 120
|
Re: EzGo series TXT issues again
So it should read pack voltage up there somewhere as well?
|
05-03-2020, 10:56 AM | #17 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: EzGo series TXT issues again
|
05-23-2020, 11:57 AM | #18 |
Getting Wild
Join Date: Feb 2013
Location: Chesnee, SC
Posts: 120
|
Re: EzGo series TXT issues again
Installed the SR48400 and it runs forward in reverse and reverse in forward. I am sure it is a simple wire switch, but which wires? I don't want to blow the brand new controller up before getting to use the cart.
|
05-23-2020, 02:10 PM | #19 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: EzGo series TXT issues again
Swap the cables on the F/R switch at the 9 and 3 o'clock positions.
|
05-25-2020, 07:46 AM | #20 |
Getting Wild
Join Date: Feb 2013
Location: Chesnee, SC
Posts: 120
|
Re: EzGo series TXT issues again
I swapped the F1 and F2 cables at the motor.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
EZGO 36 volt series issues | Electric EZGO | |||
1998 EZ-GO TXT Series 36V Upgrades and Performance Issues | Electric EZGO | |||
EZGO series cart issues - won't move | Electric EZGO | |||
36 volt series throttle issues | Electric EZGO | |||
Rebuilt Series 48v TXT Cart - Controller Issues?? | Electric EZGO |