Need Battery Cable Lengths

[Swamp_Cart_401]

I have attempted to search this forum for the answers but I have not found them yet.

I am working on a 1998 EZGO TXT DCS SEPEX and want to replace original battery cables with 2GA. I already have replacement wires for battery pack need to know proper lengths for other 5 wires (I believe there are 10 total).

The cables will also be going on a new Alltrax and upgraded solenoid from carts unlimited.net so I am not sure if that will change needed length.

My info/guess work thus far is based off the attached images, any help would be great.

[99DawgTXT]

Had same question, ordering 2g soon and not sure if 10 foot total would be enough.

[Sir Nuke]

considering your question....can we assume your plan is to make them yourself?? something else to consider is are you making cables for a 36v configuration or a 48v configuration?? as the lenth of the cables are different.

OR you could buy a set already made by cartsunlimited. AND whether you are making them or buying them, make them in the 48v configuration/lengths as if your cart is 36v and if in the future you jump to 48v, they will still fit, but they won't if they are made in 36v configuration.

[Swamp_Cart_401]

Originally Posted by Sir Nuke

considering your question....can we assume your plan is to make them yourself?? something else to consider is are you making cables for a 36v configuration or a 48v configuration?? as the lenth of the cables are different.

OR you could buy a set already made by cartsunlimited. AND whether you are making them or buying them, make them in the 48v configuration/lengths as if your cart is 36v and if in the future you jump to 48v, they will still fit, but they won't if they are made in 36v configuration.

Sorry about not being clear. Was going to be fabricating them for 36v, longer length makes sense in case of future upgrade to 48v. Thanks for the response. If I don’t have the time to fabricate, I will most likely go the cartsunlimited.net route.