|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-15-2020, 04:41 PM | #1 |
Not Yet Wild
Join Date: Jun 2020
Location: Sweaty, Louisiana
Posts: 11
|
NCX300DCS to XCT48400DCS Worth the Switch?
98 TXT DCS has NCX300 currently. Is it worth the switch to the alltrax XCT 48400?
Also, will this change the difficulty of the swap out? Rather than it being the stock Curtis controller? Any input is appreciated. Thanks. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-15-2020, 10:07 PM | #2 |
Not Yet Wild
Join Date: Jun 2020
Location: Sweaty, Louisiana
Posts: 11
|
Re: NCX300DCS to XCT48400DCS Worth the Switch?
Went ahead and swapped it out. Wasn’t too bad.
|
07-15-2020, 11:14 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: NCX300DCS to XCT48400DCS Worth the Switch?
Big difference. Higher peak output. Higher longer sustained output. Reverse polarity on the input and output. Throttle auto calculating. Optional cooling fan and more.
|
07-18-2020, 02:08 PM | #4 | |
Not Yet Wild
Join Date: Jun 2020
Location: Sweaty, Louisiana
Posts: 11
|
Re: NCX300DCS to XCT48400DCS Worth the Switch?
Quote:
Thanks! |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Changing keyed Forward/reverse switch to rocker switch | Electric EZGO | |||
99 club car 48 volt has rocker switch with diag plug hole in bottom of switch | Electric Club Car | |||
Troubleshooting an Alltrax NCX300DCS | Electric EZGO | |||
2009 Precedent run/tow toggle switch replaced with keyed switch | Electric Club Car | |||
Just got a G9 need to know how to wire ignition switch to push pull switch ASAP! | Gas Yamaha |