|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
07-20-2020, 07:02 PM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2020
Posts: 12
|
Tips needed for DIY top
I picked up an L400 today and it has no top, no struts front or rear. It does have the threaded holes on each side where it looks like a plate should mount for this "strut" to top hardware. What is the thread type for these holes? I was thinking of using 1/2" conduit to fabricate my own struts/framing and maybe do a plywood roof.
What should I be aware of going into this? The cart was (I think) a steal at $200. Thanks. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-21-2020, 05:20 AM
|
#2 |
|
Gone Wild
 Join Date: Aug 2012
Location: Houma, Louisiana
Posts: 950
|
Re: Tips needed for DIY top
Another option would be to check local golf cart stores for used parts. Maybe they made some "roadster" type carts with short windshield and have parts just laying around. I have found a multitude of tan tops like that. They were putting black ones on and had a pile of used ones in the back.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| EZ-Go / Not so easy - Troubleshooting tips needed | Electric EZGO | |||
| g2 engine rebuild tips and tricks needed | Gas Yamaha | |||
| New to this and could use some tips | Sled Engine Swaps | |||
| Hf 13 in a g9. Any tips? | Clone Engine Swaps | |||
| Tech tips needed | Electric EZGO | |||
Linear Mode
