Pro fit 36v just clicking over and over

turbosl2 · 09-19-2021, 11:22 AM

I leave my cart in the charger when not at camp. Today when I arrived it was clicking over and over, no lights on the front of the charger at all

Pro fit 36018 charger. 36v EzGo. Usually when I plug it in I hear the relay click once then it starts charging. Does the charger need a new board?

kgsc · 09-19-2021, 01:34 PM

Possible the transformer died or the circuit board in front of it. Can you post a picture of the charger?

turbosl2 · 09-19-2021, 06:45 PM

Sure. This is what it looks like. I can swap any parts needed just not sure what part is the problem.

turbosl2 · 09-19-2021, 06:47 PM

Front

turbosl2 · 09-26-2021, 08:37 AM

Today I performed the following checks.
I have six 6v interstate GC2-XHD-UTL batteries. Pack voltage is 37volts, golf cart capacity meter shows 1/2. Each battery is ~6.15 to 6.2v yet my charger keeps clicking and will not work, no lights, nothing. I have to cover removed and my first thought was to replace the control board ($150) but I was looking for some help to test the transformer before I drop the money amd that’s not the problem. Can anyone help?

turbosl2 · 09-26-2021, 08:39 AM

Here is a video

https://youtube.com/shorts/tW1Zy-k3qqk?feature=share

kgsc · 09-26-2021, 11:14 AM

With it plugged in the wires from the transformer to the board disconnected there should be around 45 volts AC on the two wires.

turbosl2 · 09-26-2021, 01:42 PM

Quote:

Originally Posted by kgsc

With it plugged in the wires from the transformer to the board disconnected there should be around 45 volts AC on the two wires.

That helps. I will check that in a few hours.

turbosl2 · 09-26-2021, 02:07 PM

Quote:

Originally Posted by kgsc

With it plugged in the wires from the transformer to the board disconnected there should be around 45 volts AC on the two wires.

Ok I guess I am not sure how to do that. The input side is connected to a relay.

kgsc · 09-26-2021, 02:38 PM

Well yours has a relay where mine did not. Check to see if the relay is closing. Here is the manual https://www.dpipower.com/MNUL/General_Chargers.pdf

09-19-2021, 11:22 AM	#1
turbosl2 Not Yet Wild Join Date: Oct 2019 Posts: 48	Pro fit 36v just clicking over and over I leave my cart in the charger when not at camp. Today when I arrived it was clicking over and over, no lights on the front of the charger at all Pro fit 36018 charger. 36v EzGo. Usually when I plug it in I hear the relay click once then it starts charging. Does the charger need a new board?
turbosl2 Not Yet Wild Join Date: Oct 2019 Posts: 48

09-19-2021, 01:34 PM	#2
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,140	Re: Pro fit 36v just clicking over and over Possible the transformer died or the circuit board in front of it. Can you post a picture of the charger?

09-26-2021, 08:37 AM	#5
turbosl2 Not Yet Wild Join Date: Oct 2019 Posts: 48	Re: Pro fit 36v just clicking over and over Today I performed the following checks. I have six 6v interstate GC2-XHD-UTL batteries. Pack voltage is 37volts, golf cart capacity meter shows 1/2. Each battery is ~6.15 to 6.2v yet my charger keeps clicking and will not work, no lights, nothing. I have to cover removed and my first thought was to replace the control board ($150) but I was looking for some help to test the transformer before I drop the money amd that’s not the problem. Can anyone help?
turbosl2 Not Yet Wild Join Date: Oct 2019 Posts: 48

09-26-2021, 08:39 AM	#6
turbosl2 Not Yet Wild Join Date: Oct 2019 Posts: 48	Re: Pro fit 36v just clicking over and over Here is a video https://youtube.com/shorts/tW1Zy-k3qqk?feature=share
turbosl2 Not Yet Wild Join Date: Oct 2019 Posts: 48

09-26-2021, 11:14 AM	#7
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,140	Re: Pro fit 36v just clicking over and over With it plugged in the wires from the transformer to the board disconnected there should be around 45 volts AC on the two wires.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

09-26-2021, 02:38 PM	#10
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,140	Re: Pro fit 36v just clicking over and over Well yours has a relay where mine did not. Check to see if the relay is closing. Here is the manual https://www.dpipower.com/MNUL/General_Chargers.pdf

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
G29 New solenoid not clicking	Electric Yamaha
Clicking sound	Electric EZGO
2000 CC DS Only Clicking	Electric Club Car
Solenoid clicking....no go!!!	Electric Club Car
clicking	Electric EZGO