lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 09-19-2021, 04:11 PM   #1
BigYoung
Not Yet Wild
 
Join Date: Feb 2018
Posts: 16
Default Alltrax XCT controller cable terminal & cable lug install

Hello Folks,
I'm upgrading my 96 EZGO DCS with Alltrax XCT400DCS from Scotty and installed my cables to the controller by sliding/inserting the cable lug between the controller terminal hump and terminal base and then bolted down the lug until tight (flattening the hump).

I just watched a You Tube DIY Golf Cart video Alltrax XCT Controller install) wherein the installer (with many cart videos) placed the cable lug on top of the controller terminal hump and bolted the cable down.

Which is the preferred method? All comments welcome. Thanks
BigYoung is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 09-19-2021, 05:31 PM   #2
Volt_Ampere
Gone Wild
Yamaha
 
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,191
Default Re: Alltrax XCT controller cable terminal & cable lug install

On top is the correct method!
Volt_Ampere is offline   Reply With Quote
Old 09-19-2021, 06:20 PM   #3
BigYoung
Not Yet Wild
 
Join Date: Feb 2018
Posts: 16
Default Re: Alltrax XCT controller cable terminal & cable lug install

10-4. Grateful for your assistance.
BigYoung is offline   Reply With Quote
Old 09-19-2021, 07:18 PM   #4
BigYoung
Not Yet Wild
 
Join Date: Feb 2018
Posts: 16
Default Re: Alltrax XCT controller cable terminal & cable lug install

Volt,
Connected the cables correctly, and have 4 blinking green and then solid green.
Successful install for a newbie, cart is rolling again.
Thanks
BigYoung is offline   Reply With Quote
Old 09-19-2021, 09:53 PM   #5
Volt_Ampere
Gone Wild
Yamaha
 
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,191
Default Re: Alltrax XCT controller cable terminal & cable lug install

Good deal! I have two Yamaha carts with Alltrax and Lithium and they are solid.
Volt_Ampere is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO




Similar Threads
Thread Forum
Same battery cable terminal corroding Electric EZGO
Cable install please help Electric Club Car
Alltrax DcX cable Electric EZGO
2ga welding cable vs 2ga battery cable vs 2ga speaker cable Electric Club Car
A1 cable and motor terminal heating up Electric EZGO


All times are GMT -5. The time now is 12:16 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.