rpmlimiter

coondog 2010 · 10-02-2010, 04:34 PM

Press accelerator to floor runs good then drops off to nothing

jiminpa · 10-03-2010, 12:30 PM

does not sound like a rpm limiter problem. An rpm limiter electronically senses the spark, converts it to rpms, if the number is too high, it shorts out the spark, killing the ignition momentarily which drops the rpms, it then allows the spark and the motor continues to run. so it is kind of like turning off and on the ignition switch to regulate the speed. most of the time when the rpm limiter goes, it won't run at all or nothing over a idle without cutting out. try disconnecting the ground on the rpm limiter. if it acts the same, it is very unlikely that it is the limiter.

10-02-2010, 04:34 PM	#1
coondog 2010 Not Yet Wild Join Date: Jul 2010 Location: jonesboro,la Posts: 25	rpmlimiter Press accelerator to floor runs good then drops off to nothing

10-03-2010, 12:30 PM	#2
jiminpa Gone Wild Join Date: Jun 2010 Location: Snowy NW PA Posts: 275	Re: rpmlimiter does not sound like a rpm limiter problem. An rpm limiter electronically senses the spark, converts it to rpms, if the number is too high, it shorts out the spark, killing the ignition momentarily which drops the rpms, it then allows the spark and the motor continues to run. so it is kind of like turning off and on the ignition switch to regulate the speed. most of the time when the rpm limiter goes, it won't run at all or nothing over a idle without cutting out. try disconnecting the ground on the rpm limiter. if it acts the same, it is very unlikely that it is the limiter.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum