|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-10-2015, 08:45 PM | #11 |
Getting Wild
Join Date: May 2011
Posts: 109
|
Re: Need to do the top end on my fe290
I pulled the engine, now to figure out what I need and order it.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-16-2015, 12:18 PM | #12 |
Getting Wild
Join Date: May 2011
Posts: 109
|
Re: Need to do the top end on my fe290
Doing my rings now, and I cant find anywhere what ring goes on the top, I have one with a silver edge and one with a black edge.
|
04-16-2015, 02:42 PM | #13 |
Getting Wild
Join Date: May 2011
Posts: 109
|
Re: Need to do the top end on my fe290
Found the instructions for the rings in the manual, but nothing for the head gasket, does it need to go in with a certain side up?
|
04-16-2015, 02:52 PM | #14 |
Gone Wild
Join Date: Mar 2012
Location: CENTRAL PENNSYLVANIA
Posts: 1,466
|
Re: Need to do the top end on my fe290
it can go either way just make sure all the holes line up with it on the head and then on the block
|
04-16-2015, 04:36 PM | #15 |
Getting Wild
Join Date: May 2011
Posts: 109
|
Re: Need to do the top end on my fe290
ok that part is done. Now am I crazy or is there supposed to be a rubber surround that goes on the rpm limiter? I thought there was one there, but now I can't find it. And I cant find it online either.
|
04-17-2015, 12:25 PM | #16 |
Getting Wild
Join Date: May 2011
Posts: 109
|
Re: Need to do the top end on my fe290
Can someone check this for me please? I need to throw this back together
|
04-17-2015, 12:35 PM | #17 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,934
|
Re: Need to do the top end on my fe290
There's no rubber between the front mounting bracket and the limiter,
there is however a "damper" type gasket between the limiter and the rear mounting bracket! |
04-17-2015, 12:45 PM | #18 |
Getting Wild
Join Date: May 2011
Posts: 109
|
Re: Need to do the top end on my fe290
it surrounds the limiter right?
|
04-18-2015, 07:14 AM | #19 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,934
|
Re: Need to do the top end on my fe290
I apologize for the delay, I don't know if you still need this or not, but here it is!
The front bracket surrounds the limiter with no rubber/gasket/insulator between them! |
04-18-2015, 07:43 AM | #20 |
Getting Wild
Join Date: May 2011
Posts: 109
|
Re: Need to do the top end on my fe290
Thanks. I got it all back together. With only one extra nut. A nylon lock nut. Even got it running after I tood the valve cover off and put the push rods in the right place.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
03 FE290 - gas in the oil? | Gas Club Car | |||
fe290 | Golf Carts and Parts | |||
looking for a fe290 | Gas Club Car | |||
97 fe290 head on 95 fe290?? | Gas Club Car | |||
Wtb Cc Fe290 | Golf Carts and Parts |