lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 05-01-2015, 06:45 AM   #1
Cdebo1
Getting Wild
 
Cdebo1's Avatar
Yamaha
 
Join Date: Apr 2014
Location: Florida
Posts: 129
Default The "Swamp Thing" Build

New project. Picked up a G21A-Straight trade for my TXT. Went from electric to GAS. Big Upgrade. The cart was repainted by last owner and has a army look think i will keep the look but a lot has to change. Fist the dump bed is gone to make room for a rear seat. The roof frame in the photo is an old boat Bimini...GONE needs a cage. Then add a lift some tunes and run through the engine. Here is where I am at so far.
1. New Primary Clutch - DONE
2. New Belts - DONE
3. New Accel Cables and Governor - DONE
4. Dump Bed - GONE - DONE
5. Custom Rear Seat _ WORKING ON IT
6. Custom Top - WORKING ON IT
7. 6" Jakes Lift with Tires - IN PROGRESS
8. Custom Speaker Enclosure - IN PROGRESS
9. Who knows - Lets see where the wife says enough>>???!!!
Attached Images
File Type: png IMG_6637.PNG (1.82 MB, 0 views)
File Type: jpg IMG_6694.jpg (209.5 KB, 0 views)
File Type: jpg IMG_6697.jpg (82.6 KB, 0 views)
File Type: jpg IMG_6708.jpg (171.6 KB, 0 views)
File Type: jpg IMG_6854.jpg (81.9 KB, 0 views)
Cdebo1 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 05-01-2015, 06:48 AM   #2
Cdebo1
Getting Wild
 
Cdebo1's Avatar
Yamaha
 
Join Date: Apr 2014
Location: Florida
Posts: 129
Default Re: The "Swamp Thing" Build

A few more photos
Attached Images
File Type: jpg IMG_6858.jpg (192.7 KB, 0 views)
File Type: jpg IMG_6860.jpg (102.9 KB, 0 views)
Cdebo1 is offline   Reply With Quote
Old 05-01-2015, 07:44 PM   #3
Cdebo1
Getting Wild
 
Cdebo1's Avatar
Yamaha
 
Join Date: Apr 2014
Location: Florida
Posts: 129
Default Re: The "Swamp Thing" Build

Lift done
Attached Images
File Type: jpg image.jpg (299.6 KB, 0 views)
Cdebo1 is offline   Reply With Quote
Old 05-01-2015, 08:35 PM   #4
LVCJ
going,.. going,.. gone!
 
LVCJ's Avatar
E-Z-GO
 
Join Date: Apr 2014
Location: Third Rock from the Sun...Vegas baby!
Posts: 1,422
Default Re: The "Swamp Thing" Build

Lookin good!

(I think you put the lift on upside down???...............) see pic^^^^^
LVCJ is offline   Reply With Quote
Old 05-02-2015, 09:49 AM   #5
Cdebo1
Getting Wild
 
Cdebo1's Avatar
Yamaha
 
Join Date: Apr 2014
Location: Florida
Posts: 129
Default Re: The "Swamp Thing" Build

Yea it's easier to work on that way. Posting from the phone sucks.
Cdebo1 is offline   Reply With Quote
Old 05-02-2015, 04:20 PM   #6
cgtech
Over This Interview Is...
 
cgtech's Avatar
Yamaha
 
Join Date: Jun 2012
Location: AZ
Posts: 17,449
Default Re: The "Swamp Thing" Build

Already took it on a trip to china, this is how our cameras work over there...
cgtech is offline   Reply With Quote
Old 05-04-2015, 09:26 AM   #7
Cdebo1
Getting Wild
 
Cdebo1's Avatar
Yamaha
 
Join Date: Apr 2014
Location: Florida
Posts: 129
Default Re: The "Swamp Thing" Build

So here is the weekend up date. The roof was on my old ezgo just threw it up there to see height. Now the cart wont fit in my shed....OH well bigger shed time!! What do you guys think? Thoughts?
Attached Images
File Type: jpg IMG_6881.jpg (157.7 KB, 0 views)
File Type: jpg IMG_6882.jpg (135.3 KB, 0 views)
File Type: jpg IMG_6884.jpg (155.9 KB, 0 views)
Cdebo1 is offline   Reply With Quote
Old 05-11-2015, 11:35 AM   #8
Cdebo1
Getting Wild
 
Cdebo1's Avatar
Yamaha
 
Join Date: Apr 2014
Location: Florida
Posts: 129
Default Re: The "Swamp Thing" Build

Starting to come together. Just need to get a piece of Acrylic for the windshield and then the canvas for roof and rear seat...
Attached Images
File Type: jpg IMG_6921.jpg (268.3 KB, 0 views)
Cdebo1 is offline   Reply With Quote
Old 05-12-2015, 03:29 AM   #9
dbmachine
Gone Wild
 
dbmachine's Avatar
 
Join Date: Oct 2012
Posts: 1,733
Default Re: The "Swamp Thing" Build

You could always chop a few inches out of the roof supports and sleeve them back into place with a welder and tubing. Looks awesome though keep it coming
dbmachine is offline   Reply With Quote
Old 05-12-2015, 01:16 PM   #10
Cdebo1
Getting Wild
 
Cdebo1's Avatar
Yamaha
 
Join Date: Apr 2014
Location: Florida
Posts: 129
Default Re: The "Swamp Thing" Build

This was a full custom tube top...allot of cutting and welding.....almost done. I made it out of 3/4"emt seems rigid enough may put in a cross in the rear supports just seems a little wigglyy with the speaker box uptop. But i need to bolt it all down just to see..
Cdebo1 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Project Build Yamaha G-16 with Big Block , Long Travel and 26" Swamp Fox Lifted Golf Carts
TXT build, Built Predator 420, Strech lift, custom paint, 26" tires and 14" wheels Clone Engine Swaps
Check this thing out. Another odd ball "cart". Gas golf carts
Can I fit 27x12x12 Swamp Lites on a EZGO lifted 6"? Lifted Golf Carts
Big Freaking Tires 26" Swamp Lites Golf Carts and Parts


All times are GMT -5. The time now is 04:22 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.