|
|
|||||||
| Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
  |
|
|
Thread Tools | Display Modes |
09-02-2017, 04:48 AM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2014
Posts: 7
|
EMC Vibration
I have a 2006 EMC 48volt Golf cart. It has a Curtis 1268 controller. I have a problem with starting off slow, as it vibrates initially but then smoothes out when more speed is applied. When throttle has been released the regen then does the same thing, it vibrates more as it slows down. Any help would be very helpful.
Cheers Harry |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-02-2017, 08:01 AM
|
#2 |
|
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,114
|
Re: EMC Vibration
Sounds like stuck motor bushes, or worn motor brushes
|
|
|
|
|
09-02-2017, 06:53 PM
|
#3 |
|
Not Yet Wild
Join Date: Mar 2014
Posts: 7
|
Re: EMC Vibration
thanks that sounds like a big problem. could it have anything to do with the speed controller. could I try bypassing that.
|
|
|
|
|
09-02-2017, 06:56 PM
|
#4 |
|
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,114
|
Re: EMC Vibration
Has nothing to do with the controller and its not that big of an issue
|
|
|
|
|
09-06-2017, 06:05 AM
|
#5 |
|
Not Yet Wild
Join Date: Mar 2014
Posts: 7
|
Re: EMC Vibration
Pulled motor out and had a look. yep worn brushes, 1 broken spring and the commutator needs a good clean up. Now i just have to find out where i can get these from.
 |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G2 Vibration | Gas Yamaha | |||
| Vibration help | Gas Yamaha | |||
| vibration | Electric EZGO | |||
| 85 G1 Vibration | Gas Yamaha | |||
| vibration | Gas Columbia ParCar | |||
Linear Mode
