10-01-2020, 03:04 PM | #11 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Sr48500 Install
I cannot see the diode on the Solenoid to make sure it is wired correctly.
Since your red and white wires are on the bottom terminal, make sure the stripped side of the diode is also on the bottom terminal on the other side. On the Solenoid big post make sure the big cable lug is first in direct contact with the Solenoid post base and the pre-charge resistor and other ring terminals go on top. Make sure the cables from the swivel posts of the FNR go to Motor S1 and S2 terminals. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-01-2020, 03:49 PM | #12 |
Not Yet Wild
Join Date: Sep 2020
Posts: 19
|
Re: Sr48500 Install
Thank you guys for all the help!! I finally got her up and running again!!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Mock Install: Alltrax SR48500 Controller, 400a Solenoid, SW202 Reversing Contactor | Electric EZGO | |||
Cart won't move after SR48500 install | Electric EZGO | |||
2008 -48v conversion - SR48500 and sw202 install | Electric EZGO | |||
Problems with sr48500 and solenoid install | Electric Club Car | |||
TXT 36V still dead after alltrax SR48500 install! :( | Electric EZGO |