|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-27-2021, 01:36 PM
|
#1 |
|
Getting Wild
Join Date: Sep 2018
Posts: 124
|
RXV golf car does not activate
We have had this happen to us with two different RXV's with the same problem:
When you turn on the car the solenoid clicks twice rapidly and the start up cycle does not complete the sequence. We verified the 5 volt circuit and are getting the correct voltages. We also verified the resistance in the motor brake and it checked out. We put a new speed sensor (does not use bearing encoder) but not change in the problem. The last thing we did was run a know working main harness and controller, including solenoid. Still no go. Have any of you out there encountered something similar? We have contacted an ezgo tech before but he could not also determine the cause. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2005 (I think) TXT with PDS will not run and charger will not activate | Electric EZGO | |||
| Gov failure to activate | Gas Club Car | |||
| New controller and now solenoid won't activate | Electric EZGO | |||
| 48V DS, solenoid wont activate ? | Electric Club Car | |||
| DCS solenoid will not activate | Electric EZGO | |||
Linear Mode
