|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-28-2021, 06:03 PM | #1 |
Not Yet Wild
Join Date: Jun 2021
Location: Florida
Posts: 10
|
Anyone know how to test and repair a 1264-5407 controller on a st400 ezgo ?
I recently got a st400 cart its a 2010 and i have rebuilt almost the whole cart. Charged the batteries. It wont move. I got a code 21 and 52, after i charge the batteries and tested the solenoid those codes are not there any longer. But i do have a code 31 which i have read that a transistor or ? Is bad in the controller. I have looked up several blogs and some tell you how to repair but the pictures does not look like my controller. I did find a link to bench testing the controller but i guess its a old link. Because its not available anymore. So i figure i would ask anyone out there that could help me out before i buy a new controller. And also i wanted to be able to test the motor with a meter to see if all is good there also. Any help would be greatly appreciated. Jerry in Florida.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
2005 txt 48v shuttle Curtis 1264-5407 controller | Electric EZGO | |||
Curtis PMC SepEx 1264-5407 Status Light | Electric EZGO | |||
2005 Ezgo TXT Shuttle 6 (48v) controller 1264-5407 | Electric EZGO | |||
2010 1264-5407 shuttle 6 precharge fault | Electric EZGO |