|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
02-21-2012, 11:10 AM
|
#1 |
|
Not Yet Wild
Join Date: Mar 2011
Location: Arkansas
Posts: 46
|
Roof Frame/support for G2
I'm going to try to fab up a support for a roof, the side posts and top. I was wondering if anyone had pics or suggestions/tips for one they have built. I have read that the roof needs to be 53 to 55 inches above the floor boards but thats about all I have read. I would like to use one of those flip down windshields for the front window, so I want to make sure that I fab up the front to accomodate that window, but I don't know the measurements of those windshields. Any help/suggestions would be appreciated.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-22-2012, 10:14 AM
|
#2 |
|
Admin
 Join Date: Dec 2006
Location: TN
Posts: 101,852
|
Re: Roof Frame/support for G2
I figured there would be all kinds of post by today on this. I'm not even near my carts to get these measurements. At my other place. Can get them this weekend if I remember and no else has posted.
|
|
|
|
|
|
|
|
02-23-2012, 11:50 AM
|
#3 |
|
Not Yet Wild
Join Date: Mar 2011
Location: Arkansas
Posts: 46
|
Re: Roof Frame/support for G2
Hmm,
well I suppose there must not be a lot of information available on this. I'm mostly looking for the measurements of the fold down windshield so I can try to make the front supports the correct size. |
|
|
|
|
07-16-2012, 10:56 PM
|
#4 |
|
Not Yet Wild
Join Date: Feb 2012
Posts: 10
|
Re: Roof Frame/support for G2
Has anyone found a company that makes brackets to install a 80" roof on a g2?
|
|
|
|
|
07-17-2012, 04:30 PM
|
#5 | |
|
Never really finished
Join Date: Jun 2010
Location: Georgia
Posts: 1,102
|
Re: Roof Frame/support for G2
Quote:
|
|
|
|
|
|
07-17-2012, 04:51 PM
|
#6 |
|
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: Roof Frame/support for G2
The factory-tops are 1" Square-tube(aluminum,but steel will work).
 |
|
|
|
|
07-17-2012, 10:38 PM
|
#7 |
|
Not Yet Wild
Join Date: Feb 2012
Posts: 10
|
Re: Roof Frame/support for G2
Yeah thats correct, but bending it with a nice
Radius probably not to easy without a square tune bender. I thought someone might sell them already bent |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Roof Support for G16 | Gas Yamaha | |||
| Rear roof support | Electric Club Car | |||
| wtb club car ds front roof support | Golf Carts and Parts | |||
| EzGo Roof Support | Electric EZGO | |||
| 95 front roof support | Gas Yamaha | |||
Linear Mode
