|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
03-14-2012, 11:31 AM
|
#21 |
|
Getting Wild
Join Date: Jun 2010
Location: Lake of the Ozarks MO
Posts: 128
|
Re: G14 rebuild kit?
Not sure ill look. but i just lookied up the year older and newer and its still the same part #...
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-14-2012, 11:34 AM
|
#22 |
|
Getting Wild
Join Date: Jun 2010
Location: Lake of the Ozarks MO
Posts: 128
|
Re: G14 rebuild kit?
Yep that comes back to a 96 G14. I got nothing , just get another belt...
|
|
|
|
|
03-14-2012, 12:08 PM
|
#23 |
|
Not Yet Wild
Join Date: Mar 2012
Location: Brantley alabama
Posts: 64
|
Re: G14 rebuild kit?
Could it be that rear pully deal? The one that moves when you give it throttle
|
|
|
|
|
03-14-2012, 12:17 PM
|
#24 |
|
Getting Wild
Join Date: Jun 2010
Location: Lake of the Ozarks MO
Posts: 128
|
Re: G14 rebuild kit?
Ive never seen one do crazy stuff like what you talk about, have you put the cart in N and gave it gas to see if it moved in and out smoothly and watch if the belt travels all the way to the top? if not give it a try... this could really be as easy as a bad new belt.
|
|
|
|
|
03-14-2012, 12:21 PM
|
#25 |
|
Not Yet Wild
Join Date: Mar 2012
Location: Brantley alabama
Posts: 64
|
Re: G14 rebuild kit?
I did that before i drove it. It did what you said. I dont know what else it could be. In neutral the engine gets high rpm but driving its like its just no good with the belt that broke. could it be cause i turned the governor in a good ways?
|
|
|
|
|
03-14-2012, 12:28 PM
|
#26 |
|
Getting Wild
Join Date: Jun 2010
Location: Lake of the Ozarks MO
Posts: 128
|
Re: G14 rebuild kit?
No it would have nothing to do with the Gov. I would take the cover off the front clutch and take a good long hard look at the rollers and ramps to make sure they arent shot (flat spots) because they can cause you hell if they are.
|
|
|
|
|
03-14-2012, 12:30 PM
|
#27 |
|
Not Yet Wild
Join Date: Mar 2012
Location: Brantley alabama
Posts: 64
|
Re: G14 rebuild kit?
Is it hard to get off?
|
|
|
|
|
03-14-2012, 12:34 PM
|
#28 |
|
Getting Wild
Join Date: Jun 2010
Location: Lake of the Ozarks MO
Posts: 128
|
Re: G14 rebuild kit?
No its not too bad, do a look around the site you will find a how to on it.
|
|
|
|
|
03-14-2012, 12:57 PM
|
#29 |
|
Vegas modded 420
 Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: G14 rebuild kit?
This is my G9, is about how clutches stock should work in neutral.
Something is wrong with your cart belt should last for years. I've only used two belts on this lifted cart since 99, though I only use it 5-6 months a year. Yamaha belts from the dealer, not aftermarket. Check your motor mounts is the motor moving, or pulling into the trans under load? Do any of the sheaves (parts that touch belt) wobble or have holes worn in them? |
|
|
|
|
03-14-2012, 01:24 PM
|
#30 |
|
Not Yet Wild
Join Date: Mar 2012
Location: Brantley alabama
Posts: 64
|
Re: G14 rebuild kit?
The motor pulls back when you gas it.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G1 Rebuild ? | Gas Yamaha | |||
| Rebuild about done! | Electric Club Car | |||
| G1 rebuild | Gas Yamaha | |||
| 92 Par Car rebuild | Gas Columbia ParCar | |||
| rebuild kit | Gas Columbia ParCar | |||
Linear Mode
