G14 Blow by

jpavlak · 04-23-2012, 08:08 PM

Finally got to work on cart agian. Compression test at full throttle showed just under 180. checked valves, exhaust was off by .oo1. I adjusted, still no change. I put a PCV valve in the line and that worked until I drove the cart and the pressure got to high and blew off the oil fill cap. Had a person tell me that the angle of the motor due to lift kit could cause this, does anyone know about this. Also saw that some people have put gas filters inline and either ran the tube down or to another catch basin, will this possibly work or will it still blow off fill cap? Any help is appreciated. Thanks

04-23-2012, 08:08 PM	#11
jpavlak Not Yet Wild Join Date: Apr 2012 Location: Steward, Il Posts: 12	Re: G14 Blow by Finally got to work on cart agian. Compression test at full throttle showed just under 180. checked valves, exhaust was off by .oo1. I adjusted, still no change. I put a PCV valve in the line and that worked until I drove the cart and the pressure got to high and blew off the oil fill cap. Had a person tell me that the angle of the motor due to lift kit could cause this, does anyone know about this. Also saw that some people have put gas filters inline and either ran the tube down or to another catch basin, will this possibly work or will it still blow off fill cap? Any help is appreciated. Thanks

Similar Threads
Thread	Forum
It didn't blow up, but!	Electric Club Car
ez-blow!	Golf Carts and Parts
Big lights, G1- what did I blow up?	Gas Yamaha
controller blow up?!@$$#@	Electric EZGO
blow by and compression	Gas EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum