|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-04-2012, 01:17 PM | #1 |
Not Yet Wild
Join Date: Jun 2012
Posts: 1
|
G9 Clutch
I have a g9 in need of a new drive belt and possibly a clutch. when reving the engine with no drive belt should the clutch move in and out? the old belt looks like it was burnt or melted.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-05-2012, 06:24 AM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,046
|
Re: G9 Clutch
Welcome to BGW!
Yes, the clutch should close up as the rpm increases. The belt should be 1-3/16" wide. |
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Clutch Help - G1 Drive Clutch Spring | Gas Yamaha | |||
Tips & Hints for installing Clutch Tuning Kit, Removal of Drive Clutch | Gas Club Car | |||
Dive Clutch and Driven Clutch. Is this right?? | Gas EZGO | |||
clutch to clutch distance | Gas Club Car |