Valve job / Fail

cda30 · 10-21-2012, 04:52 PM

Help..just redid my valves.. cart all back together but refuses to start.. getting spark and gas but nothing.. any ideas of something I might be missing to check on.. Thanks

RSP · 10-21-2012, 05:21 PM

Timing belt not on right, or valves to tight??

cda30 · 10-21-2012, 05:24 PM

I really need help on this timing belt thing..Im thinking that maybe that is the problem..I followed the diagram for lining it back up after removing it but still not sure I did it right..

pachanga90 · 10-21-2012, 05:25 PM

Are the valves adjusted properly,If they are adjusted at the wrong timing,they won't open/close properly which will cause compression-loss and also retarded/advanced timing.If the Timing-Belt is off-time your valves will be too.Hope this helps.

cda30 · 10-21-2012, 05:32 PM

is it possible to check timing without pulling the motor apart

cda30 · 10-21-2012, 06:12 PM

ok..my bad.. he did not follow the diagram on putting the timing belt back on.. he marked it and put it back on the identical way it came off.. sorry for the confusion

RSP · 10-22-2012, 06:08 PM

Ok great, soooo does that meen its up and running now??

worqhors · 10-22-2012, 07:28 PM

If the timing belt is not installed properly, it is also possible that instead of gas getting into the carb, gas is spewed out. Re-check alignment of the dots.

10-21-2012, 04:52 PM	#1
cda30 Not Yet Wild Join Date: Aug 2012 Posts: 8	Valve job / Fail Help..just redid my valves.. cart all back together but refuses to start.. getting spark and gas but nothing.. any ideas of something I might be missing to check on.. Thanks
cda30 Not Yet Wild Join Date: Aug 2012 Posts: 8

10-21-2012, 05:21 PM	#2
RSP Gone Wild Join Date: Sep 2012 Location: Michigan Posts: 351	Re: Valve job / Fail Timing belt not on right, or valves to tight??

10-21-2012, 05:24 PM	#3
cda30 Not Yet Wild Join Date: Aug 2012 Posts: 8	Re: Valve job / Fail I really need help on this timing belt thing..Im thinking that maybe that is the problem..I followed the diagram for lining it back up after removing it but still not sure I did it right..
cda30 Not Yet Wild Join Date: Aug 2012 Posts: 8

10-21-2012, 05:25 PM	#4
pachanga90 I Refuse To Get Stuck!!! Join Date: Jun 2010 Location: Hilton,NY Posts: 5,427	Re: Valve job / Fail Are the valves adjusted properly,If they are adjusted at the wrong timing,they won't open/close properly which will cause compression-loss and also retarded/advanced timing.If the Timing-Belt is off-time your valves will be too.Hope this helps.

10-21-2012, 05:32 PM	#5
cda30 Not Yet Wild Join Date: Aug 2012 Posts: 8	Re: Valve job / Fail is it possible to check timing without pulling the motor apart
cda30 Not Yet Wild Join Date: Aug 2012 Posts: 8

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

10-21-2012, 06:12 PM	#6
cda30 Not Yet Wild Join Date: Aug 2012 Posts: 8	Re: Valve job / Fail ok..my bad.. he did not follow the diagram on putting the timing belt back on.. he marked it and put it back on the identical way it came off.. sorry for the confusion
cda30 Not Yet Wild Join Date: Aug 2012 Posts: 8

10-22-2012, 06:08 PM	#7
RSP Gone Wild Join Date: Sep 2012 Location: Michigan Posts: 351	Re: Valve job / Fail Ok great, soooo does that meen its up and running now??

10-22-2012, 07:28 PM	#8
worqhors Gone Wild Join Date: May 2011 Location: Las Vegas NV Posts: 330	Re: Valve job / Fail If the timing belt is not installed properly, it is also possible that instead of gas getting into the carb, gas is spewed out. Re-check alignment of the dots.

Similar Threads
Thread	Forum
Batteries Fail to Charge	Electric Club Car
G1 Muffler BBQ Fail?	Gas Yamaha
Ultimate Fail.	Videos