|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
09-25-2013, 10:01 AM
|
#1 |
|
Not Yet Wild
Join Date: May 2011
Location: Sour Lake, Texas
Posts: 71
|
2014 efi governor
i just purchased a 2014 efi yamaha, my question is ...how do you adjust the governor????? and , also where can i get after market parts?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-26-2013, 10:31 AM
|
#2 |
|
Not Yet Wild
Join Date: May 2011
Location: Sour Lake, Texas
Posts: 71
|
Re: 2014 efi governor
thats hard to believe that no one here has an any input...i need more speed(2014 yamaha efi-drive)
|
|
|
|
|
09-26-2013, 08:48 PM
|
#3 |
|
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: 2014 efi governor
There's one or two yamaha mechanics that work on these from time to time that might chime in. The majority of us have the carb versions so were not much help. If these efi carts are like efi atvs which I'm familiar with the only way to get around the speed limiter is with a programmer or a new cdi box that has the limiter removed. I'm unfamiliar with the efi carts though. Hopefully small block will chime in.
|
|
|
|
|
09-27-2013, 08:57 AM
|
#4 |
|
maintaining a low profile
 Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
|
Re: 2014 efi governor
What about warranty issues?
|
|
|
|
|
09-27-2013, 09:25 AM
|
#5 |
|
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,874
|
Re: 2014 efi governor
Govenor adjustment on an EFI car is no differant then any other Yamaha. Take off the srvice panel(below the sweater basket), on the top of the transaxle you'll find the govenor lever. There is a threaded rod, turn in the 10mm nut till you reach the desired speed you want.
|
|
|
|
|
09-27-2013, 10:02 AM
|
#6 |
|
Not Yet Wild
Join Date: May 2009
Location: Fredericksburg, va.
Posts: 16
|
Re: 2014 efi governor
I just reached in engine bay and put a zip tie on gov. The seller told me to remove before any warranty work . Takes a minute to put on and speed will go to about 19mph. stock mine topped out at 12. Mine is a 2013 efi
|
|
|
|
|
09-27-2013, 04:59 PM
|
#7 |
|
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: 2014 efi governor
Good news that its just as easy as the carb models. I knew small block would chime on.
|
|
|
|
|
09-27-2013, 05:23 PM
|
#8 |
|
Gone Wild
Join Date: Aug 2010
Location: brooksville fl
Posts: 412
|
With the governor turned all the way up no more threads left it doesn't miss a beat. I've added 8 to one gears and the power spring for the rear clutch and 205 50 10 tires and we get 30-35 out of them at work the efi's are great
|
|
|
|
|
09-27-2013, 08:13 PM
|
#9 |
|
Gone Wild
Join Date: Oct 2012
Posts: 1,733
|
Re: 2014 efi governor
Dang son.. 35mph is hauling the mail for sure
|
|
|
|
|
09-28-2013, 06:51 PM
|
#10 |
|
Not Yet Wild
Join Date: May 2011
Location: Sour Lake, Texas
Posts: 71
|
Re: 2014 efi governor
Thanks for the replies, is there anything I need to do after that? This won't mess up the engine will it?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Governor | Gas EZGO | |||
| 94 governor | Gas Club Car | |||
| G1 governor | Gas Yamaha | |||
| G1 governor help | Gas Yamaha | |||
| governor | Gas Club Car | |||
Linear Mode
