|
|
|||||||
| Gas Club Car Gas DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
04-27-2014, 06:12 PM
|
#1 |
|
Getting Wild
Join Date: May 2011
Posts: 109
|
Front end/spindle parts kit?
I just noticed that my leaf spring is rubbing on the inside of my front wheel, and I can grab the wheel and move it north/south way too much. I guess I will need to replace the bushing or something Im not sure. But is there a whole front end kit I can just buy and do everything at once? Thanks
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-27-2014, 06:16 PM
|
#2 |
|
Call me Rich
Join Date: Mar 2011
Location: Western NY
Posts: 1,156
|
Re: Front end/spindle parts kit?
I have a complete front end off a 2003 if you're interested?
|
|
|
|
|
04-27-2014, 06:24 PM
|
#3 |
|
Getting Wild
Join Date: May 2011
Posts: 109
|
Probably cost more to ship then the parts i need would cost.
|
|
|
|
|
04-27-2014, 06:50 PM
|
#4 |
|
Call me Rich
Join Date: Mar 2011
Location: Western NY
Posts: 1,156
|
Re: Front end/spindle parts kit?
let me know what parts youll need and I can sell you those if you want.
|
|
|
|
|
04-27-2014, 07:08 PM
|
#5 |
|
Getting Wild
Join Date: May 2011
Posts: 109
|
Ok ill check it out
|
|
|
|
|
04-28-2014, 06:25 AM
|
#6 |
|
What the ....?
 Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,928
|
Re: Front end/spindle parts kit?
Here's a full front end rebuild kit from Cart Parts Plus:
http://www.cartpartsplus.com/club-ca...nd-rebuild-kit If your going to do it, you might as well do it all! Your best bet it to call them on the phone, and tell them your a BGW member!  |
|
|
|
|
04-28-2014, 09:29 PM
|
#7 |
|
Gone Wild
Join Date: Jan 2007
Location: La Porte Indiana
Posts: 1,392
|
Re: Front end/spindle parts kit?
Hanly2, where are you located? maybe update your profile?
Also, the last time I put in bushings I had to hone them slightly to let the king pin fit. I work at a tool and die shop, so this wasn't too bad on the hone at work. That might be a PITA at home in the garage though. just thought i'd mention it. |
|
|
|
|
04-29-2014, 05:22 AM
|
#8 |
|
Call me Rich
Join Date: Mar 2011
Location: Western NY
Posts: 1,156
|
Re: Front end/spindle parts kit?
I picked up a front end the other day from guy I know. Its a club car front end, but the a-arms had steel bushings and grease fittings. When did CC start doing this? Best update I ever seen!!
|
|
|
|
|
04-29-2014, 06:18 AM
|
#9 |
|
Getting Wild
Join Date: May 2011
Posts: 109
|
Im in south jersey. Havent had time to take apart the cart yet.
|
|
|
|
|
04-29-2014, 08:09 AM
|
#10 |
|
Gone Wild
Join Date: Jan 2007
Location: La Porte Indiana
Posts: 1,392
|
Re: Front end/spindle parts kit?
Those are the OLD a arms! Like 80's vintage. I believe those are bronze bushings. Also if I remember correctly the delta tower that goes with is different. One a arm mounting hole is bigger than the other to accommodate the shoulder bolt that they mount with
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Need rf spindle for stretch lt front | Lifted Golf Carts | |||
| middle 80's cc front spindle | Golf Carts and Parts | |||
| Front spindle question? | On Road Golf Carts! | |||
| What is the angle of the front spindle? | Electric EZGO | |||
| Who's got a front pic of spindle lift installed? | Electric EZGO | |||
Linear Mode
