|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
02-14-2011, 01:29 PM
|
#1 |
|
Gone Wild
Join Date: Feb 2010
Location: Alabama
Posts: 455
|
where to grease steering?
I heard a noise in my steering last week while turning the steering wheel on my '04 ezgo series txt. I greased the two fittings on the steering linkage at the front of the cart, but the noise is still there. Is there another fitting somewhere?
Thanks |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-15-2011, 11:24 AM
|
#2 |
|
Gone Wild
Join Date: Nov 2008
Location: Montgomery, AL
Posts: 1,463
|
Re: where to grease steering?
Depending on what spindles you have, you could have fitting on the spindles, your tie rod end on the rack/pinion will have a grease fitting. If you have no fitting on the spindle than you have the greaseless spindles and you can't grease them w/o thaking them apart.
|
|
|
|
|
02-15-2011, 02:06 PM
|
#3 | |
|
Gone Wild
Join Date: Feb 2010
Location: Alabama
Posts: 455
|
Re: where to grease steering?
Quote:
I had a grease fitting on each one of the spindles and one on the end of a tie rod. The driver side spindle did not take the grease as easily, but it did come out at the bottom of the spindle after a few pumps. Are there any more that you know of besides these three? Thanks |
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Grease fittings on G9 | Gas Yamaha | |||
| What grease to use | Lifted Golf Carts | |||
| how do I grease this cart | Electric Yamaha | |||
Linear Mode
