Bought A Cart

[erict]

Originally Posted by shadowman

I think if it were me I would try to rig a way to use that hole to run some air over to the batteries to help keep the compartment cool never hurts to have extra cool air under their. Just a thought sort of like a vent cover so while you're driving your getting extra air from their that might be something to think of......

Something like this.

Plastic-vent-grommet-hc643510.gif

[shadowman]

Yes that's perfect.......

[wareagle11949]

I need something that goes flat over the hole. I don't want to do anymore cutting.

[erict]

Originally Posted by wareagle11949

I need something that goes flat over the hole. I don't want to do anymore cutting.

The vent above would sit flush in the hole. The only thing is finding one the same size as your hole or you may have to trim a little more for one to fit. Should be able to use some clear silicone to hold it on.

[wareagle11949]

Originally Posted by erict

The vent above would sit flush in the hole. The only thing is finding one the same size as your hole or you may have to trim a little more for one to fit. Should be able to use some clear silicone to hold it on.

Link??

[erict]

Originally Posted by wareagle11949

Link??

http://roundvents.com/Plastic-Vents_c10.htm

[Stevegrmich]

Originally Posted by wareagle11949

I need something that goes flat over the hole. I don't want to do anymore cutting.

Duct tape . . .

[erict]

Originally Posted by Stevegrmich

Duct tape . . .

That would work too. And you can get it in white

[wareagle11949]

Originally Posted by erict

http://roundvents.com/Plastic-Vents_c10.htm

1.05 for the vent, $16.00 for shipping. I will keep looking but thanks for the link.

[shadowman]

Try a hardware store or any store that sells plumbing parts or parts for dryers washers they make those vents for houses also you should be able to get something in a store like that. I agree though dollar five for the part and $16 to ship it Nana I would keep looking...............................