|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-08-2016, 11:28 PM | #1 |
Gone Wild
Join Date: Mar 2011
Location: The hills of WV...
Posts: 330
|
Ezgo charger question.
I have a power wise charger industrial mod# 28115 g01 and serial # 53929
When I plug it into the cart it comes on and charges the cart full then shuts off like it should. However the meter on the charger stays at 0. Any ideas what's going on??? Is there a device I can do on this charger? Thanks in advance. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-09-2016, 09:11 AM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Ezgo charger question.
If the charger is charging the battery pack, but the ammeter is not showing any amp flow, you've got a bad ammeter.
As shown in the attached drawing, there are two parts to an ammeter, the meter movement and the meter shunt. The meter part of the ammeter in your charger is bad, but the shunt part is intact. Here is the part needed: https://shop.ezgo.com/products/Ammet...roduct_id=1494 . |
|
|
Similar Threads | ||||
Thread | Forum | |||
Ezgo charger question | Electric EZGO | |||
ezgo textron charger question | Electric EZGO | |||
'96 EZGO DCS charger receptacle question | Electric EZGO | |||
ezgo charger question | Electric EZGO | |||
ezgo charger battery question | Electric EZGO |