|
03-31-2016, 09:30 PM
|
#11 |
|
Not Yet Wild
Join Date: Mar 2016
Posts: 67
|
Re: No power
Well if i place a battery positive wire to one side of the Selnoid the cart drives, but when you try to go to full power it wouldn't run correctly with out that pre charge board. Now it's doing this with it, but I placed those wires in place of the diodes and it runs perfect.....
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-31-2016, 09:32 PM
|
#12 |
|
Not Yet Wild
Join Date: Mar 2016
Posts: 67
|
Re: No power
Oh and it's a brand new Selnoid. I'm so stressed out trying to figure this out
|
|
|
|
|
03-31-2016, 09:36 PM
|
#13 |
|
Gone Wild
 Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
I'm not that familiar with the dcs stuff. I thought you were talking about the diodes on the series solenoid.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Full power in reverse, part power in forward | Electric EZGO | |||
| Ezgo dies under power then regains power | Electric EZGO | |||
| 2005 Precedent starts of powered, then loses power, reverse always power | Electric Club Car | |||
| Power Wise Charger worked after board replaced now back to no power | Electric EZGO | |||
| have power on ezgo buggy no power light | Electric EZGO | |||
Linear Mode
