|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-18-2016, 02:38 PM | #1 |
Not Yet Wild
Join Date: Mar 2016
Posts: 31
|
Troubleshooting forward/reverse unit install
Just wrapped up installing a super duty forward/reverse unit from ScottyB. I followed the diagram provided but cart won't go. Cart is an 01 series txt. I upgraded to 4ga cables at same time. Do have a few questions that might lead to the issue.
What red wire Connects with blue? Where does orange wire from controller go? While replacing cable from motor to controller the M- went to A1. Diagram shows M- to A2. I wired it M- to A2, Is this correct? Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-18-2016, 03:12 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Troubleshooting forward/reverse unit install
I can't stress this enough.
Follow the diagram completely. It works |
06-19-2016, 11:51 AM | #3 |
Not Yet Wild
Join Date: Mar 2016
Posts: 31
|
Re: Troubleshooting forward/reverse unit install
still lost on what to do with orange wire coming off controller? Connect it with blue and red.
|
06-19-2016, 12:43 PM | #4 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Troubleshooting forward/reverse unit install
Quote:
If you want 1/2 speed reverse to activate connect the orange wire to the B2 terminal on the rocker switch so it is powered only in reverse. Let me know if you want to do this and I can offer a little more help. |
|
06-19-2016, 04:28 PM | #5 |
Not Yet Wild
Join Date: Mar 2016
Posts: 31
|
Re: Troubleshooting forward/reverse unit install
Ok makes sense. I'll leave it disconnected. Thanks
|
06-19-2016, 08:36 PM | #6 |
Gone Wild
Join Date: Apr 2016
Location: Greenwood, SC
Posts: 1,291
|
Re: Troubleshooting forward/reverse unit install
I had the same question and I am leaving it disconnected.
Scotty can't you put half speed reverse in the controller through the program? I'm not going to do it just for my knowledge? |
|
|
Similar Threads | ||||
Thread | Forum | |||
new controler install now (forward and reverse are backwards)need help | Electric Club Car | |||
Forward/Reverse, drives forward then jumps in reverse | Electric EZGO | |||
help with 1979 forward/reverse unit | Electric Club Car | |||
2006 ezgo forward is reverse and reverse is forward please help | Electric EZGO | |||
Reverse alarm sounds in Forward, wont go forward or reverse | Electric Club Car |