|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-15-2016, 05:39 PM | #1 |
Not Yet Wild
Join Date: Aug 2016
Posts: 21
|
Programming a Curtis 350 amp Controller
I hijacked a previous thread asking a similar question so I figured I'd start a new one to expand on this.
I had a new Curtis 350 amp controller installed in my 2011 RXV & wanted to know about programming it. Someone said to pay to have "freedom mode" unlocked. What does this buy me & what should it cost? Any other options? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-15-2016, 07:14 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Programming a Curtis 350 amp Controller
it gets you maximum top speed of 19.5mph with stock 18" tall tires (slightly faster with taller custom wheels everyone likes). cost should be in the range of $100-$200. can typically only be done by ezgo dealer. there is a key floating around here that you can rent to unlock it yourself (the drawback is it only sets to 18mph, the final adjustment must be made with a handheld programmer).
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Programming Curtis Controller | Electric golf carts | |||
Curtis controller programming | Star and Fairplay | |||
Programming a Curtis controller | Electric golf carts | |||
Curtis Controller Programming Dongle | Golf Carts and Parts | |||
programming curtis ac controller | Electric Club Car |