|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-03-2016, 04:16 PM | #1 |
Gone Wild
Join Date: Jan 2012
Location: Conway,Arkansas 72032
Posts: 775
|
1998 series
Guys
I have a 1998 EZ GO series 36 volt, stock. Problem, is I have no reverse. I have power all the way to the orange wire on the controller. Now the solenoid will not close in reverse but does in forward and will run. If I apply power (plus) to the solenoid, I will run in reverse also. Now I have changed the controller and it still does the same thing. So as you can see I need help. I don't know where to look. Thanks Sonny |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-03-2016, 04:50 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: 1998 series
Sounds like maybe a F&R micro switch problem - test the ms on the drivers side for continuity in F and in R.
|
10-03-2016, 05:02 PM | #3 |
Gone Wild
Join Date: Jan 2012
Location: Conway,Arkansas 72032
Posts: 775
|
Re: 1998 series
JohnnieB
They both checked ok. I even put a new one on the passenger side. Same problem. Thanks Sonny |
10-03-2016, 05:39 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: 1998 series
We are looking at the switch on the drivers side for this function. The same micro switch triggers the solenoid activation circuit in F&R so it makes no sense the switch is working and the wires only work in one position unless the switch is actually not working in both F&R.
|
10-03-2016, 05:56 PM | #5 |
Gone Wild
Join Date: Jan 2012
Location: Conway,Arkansas 72032
Posts: 775
|
Re: 1998 series
ScottyB
Sorry I said johnnieB Now we are talking about the continuity within the mico switch? I will go check it again. Sonny |
10-03-2016, 06:40 PM | #6 |
Gone Wild
Join Date: Jan 2012
Location: Conway,Arkansas 72032
Posts: 775
|
Re: 1998 series
Scotty
Went back and check switch and it had continuity. Then I took switch off and found a bend arm, so it couldn't make the switch when I rotated the forward and reverse lever, but would when it did it by hand. So It's fixed. Thank you for pointing me in the right direction. Sonny P.s. I can close this thread. |
|
|
Similar Threads | ||||
Thread | Forum | |||
1998 club car ds series rebuild | Electric Club Car | |||
1998 TXT Series | Golf Carts and Parts | |||
1998 EZGO series will not run | Electric EZGO | |||
1998 Series TXT Help | Electric EZGO | |||
1998 series cart wont go | Electric EZGO |