|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-12-2016, 06:00 PM | #1 |
Not Yet Wild
Join Date: Dec 2016
Posts: 1
|
TXTPDS 36 Volt Loose power when accelerator pushed with new motor
Ez Go TXTPDS 36 Volt. We replaced the motor. Now when you initially push the pedal it starts to go then stops. When you push the pedal all the way, the battery gauge on the dash actually looks like it loses power despite it being fully charged. When we checked the sylnoid the voltage was very sporadic.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-12-2016, 06:40 PM | #2 |
Gone Wild
Join Date: Jul 2011
Location: Rhode Island
Posts: 489
|
Re: TXTPDS 36 Volt Loose power when accelerator pushed with new motor
Hello and welcome.
How old are the batteries? Sounds like a loose connection and I'd start there for starters. |
12-13-2016, 05:14 PM | #3 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
Bad connection, or bad battery. It can show good voltage until you put a load on it then it drops way out. Check battery voltage at rest and trying to go and let us know what the difference is.
Sent from my SM-G930R4 using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
1986 EZ-GO Marathon Electric Cart stalls with accelerator pedal pushed beyond 1/5 way | Electric EZGO | |||
1998 Gas ClubCar go imediatly when accelerator pushed but shut off when releases | Gas Club Car | |||
g8 only goes sometimes when accelerator pushed | Gas Yamaha | |||
2001 DS Accelerator pushed to floor cuts power | Electric Club Car |