|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-19-2017, 05:33 PM | #11 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 42v XCT400PDS No reverse
you could probe the wire with your tester where it goes into the molex when Reverse is selected.... and do a continuity test with it unplugged, which it sounds like you already did.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-19-2017, 05:38 PM | #12 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 42v XCT400PDS No reverse
Quote:
Visually inspect Pin-2 in plug and jack for damage. When everything is connected normally, verify there is battery pack voltage (~38V) on J1 Pin-2 when R is selected on F/R switch. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
New xct400pds | Electric EZGO | |||
Xct400pds- sometimes won't go after complete stop | Electric EZGO | |||
Upgraded XCT400PDS and cart are lifeless | Electric EZGO | |||
Alltrax XCT400PDS Trade | Golf Carts and Parts | |||
Hesitation with a newly installed XCT400PDS controller | Electric EZGO |