First time Alltrax install..

scottyb · 11-01-2018, 10:50 AM

Glad I could help

twilliams81 · 11-01-2018, 12:27 PM

Couple things...first off this is a ‘14 non OBC Precedent. The blue bullet connector that connected from the main harness to the charging harness; does it need to be connected back? Next is the pink connector in the run/tow, small solenoid wire group; where does it need to be connected to if at all. Lastly does the black wire in the charging harness just need to be connected back to the main negative?

Sent from my iPhone using Tapatalk

Sergio · 11-01-2018, 12:44 PM

Yes, You need both.

The pink wire connects to the Solenoid big post on the battery side and provides power to the Controller and key switch.

The blue wire with bullet connector is the charger lockout signal to the Controller.

twilliams81 · 11-01-2018, 12:45 PM

Thank you...and the black connector goes straight to the main negative?

Sent from my iPhone using Tapatalk

Sergio · 11-01-2018, 12:50 PM

Quote:

Originally Posted by twilliams81

Thank you...and the black connector goes straight to the main negative?

Sent from my iPhone using Tapatalk

Yes (or Controller B-)

twilliams81 · 11-01-2018, 12:50 PM

10-4 thanks again Sergio you da man!

Sent from my iPhone using Tapatalk

twilliams81 · 11-01-2018, 03:03 PM

I believe I just about got everything wired right by I want to be absolutely certain on the diode situation. The first pic where the red circled part is my battery side of the solenoid. So is the way I have the diode in the 2nd picture correct?

Sent from my iPhone using Tapatalk

Sergio · 11-01-2018, 03:13 PM

The REGEN diode is correct on top of the Solenoid.

You are missing the small flyback diode on the Solenoid small posts.

The diode side with the stripe will go towards the light blue wire.

Just one more thing, there are two different ways to wire the F1 and F2 to make the cart go the correct direction as indicated by the FNR switch, but there are many incorrect diagrams produced by Alltrax:

Controller B+ to Motor A1 and Controller F1 to Motor F1
Controller B+ to Motor A2 and Controller F1 to Motor F2

If the cart does not move after you install everything, check the charger interlock setting in the Alltrax software:

Open the Alltrax Toolkit software and click on Tools then Options.

Make sure you have a checkmark on the "Show Charge Interlock".

Go to the "Controller Settings" Tab and scroll all the way to the bottom of that page.

Change the option: "Disable the Motor Controller when User3 is:" to "Floating/NC"

Click the "Set" button (on the left of the Program) to save the settings

twilliams81 · 11-01-2018, 03:37 PM

So I have my CONTROLLER B+ to my MOTOR A2. I would need to swap my CONTROLLER F1 to MOTOR F2 and CONTROLLER F2 to MOTOR F1?

Sent from my iPhone using Tapatalk

twilliams81 · 11-01-2018, 03:39 PM

Yes (about the diode). Scotty is gonna send me one but says it will run without it till then.

Sent from my iPhone using Tapatalk

11-01-2018, 10:50 AM	#11
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,408	Re: First time Alltrax install.. Glad I could help

11-01-2018, 12:27 PM	#12
twilliams81 Gone Wild Join Date: Aug 2016 Posts: 612	Re: First time Alltrax install.. Couple things...first off this is a ‘14 non OBC Precedent. The blue bullet connector that connected from the main harness to the charging harness; does it need to be connected back? Next is the pink connector in the run/tow, small solenoid wire group; where does it need to be connected to if at all. Lastly does the black wire in the charging harness just need to be connected back to the main negative? Sent from my iPhone using Tapatalk
twilliams81 Gone Wild Join Date: Aug 2016 Posts: 612

11-01-2018, 12:44 PM	#13
Sergio Gone Wild Join Date: Sep 2012 Location: Charlotte, NC Posts: 9,329	Re: First time Alltrax install.. Yes, You need both. The pink wire connects to the Solenoid big post on the battery side and provides power to the Controller and key switch. The blue wire with bullet connector is the charger lockout signal to the Controller.

11-01-2018, 12:45 PM	#14
twilliams81 Gone Wild Join Date: Aug 2016 Posts: 612	Re: First time Alltrax install.. Thank you...and the black connector goes straight to the main negative? Sent from my iPhone using Tapatalk
twilliams81 Gone Wild Join Date: Aug 2016 Posts: 612

11-01-2018, 12:50 PM	#16
twilliams81 Gone Wild Join Date: Aug 2016 Posts: 612	Re: First time Alltrax install.. 10-4 thanks again Sergio you da man! Sent from my iPhone using Tapatalk
twilliams81 Gone Wild Join Date: Aug 2016 Posts: 612

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

11-01-2018, 03:03 PM	#17
twilliams81 Gone Wild Join Date: Aug 2016 Posts: 612	Re: First time Alltrax install.. I believe I just about got everything wired right by I want to be absolutely certain on the diode situation. The first pic where the red circled part is my battery side of the solenoid. So is the way I have the diode in the 2nd picture correct? Sent from my iPhone using Tapatalk
twilliams81 Gone Wild Join Date: Aug 2016 Posts: 612

11-01-2018, 03:13 PM	#18
Sergio Gone Wild Join Date: Sep 2012 Location: Charlotte, NC Posts: 9,329	Re: First time Alltrax install.. The REGEN diode is correct on top of the Solenoid. You are missing the small flyback diode on the Solenoid small posts. The diode side with the stripe will go towards the light blue wire. Just one more thing, there are two different ways to wire the F1 and F2 to make the cart go the correct direction as indicated by the FNR switch, but there are many incorrect diagrams produced by Alltrax: Controller B+ to Motor A1 and Controller F1 to Motor F1 Controller B+ to Motor A2 and Controller F1 to Motor F2 If the cart does not move after you install everything, check the charger interlock setting in the Alltrax software: Open the Alltrax Toolkit software and click on Tools then Options. Make sure you have a checkmark on the "Show Charge Interlock". Go to the "Controller Settings" Tab and scroll all the way to the bottom of that page. Change the option: "Disable the Motor Controller when User3 is:" to "Floating/NC" Click the "Set" button (on the left of the Program) to save the settings

11-01-2018, 03:37 PM	#19
twilliams81 Gone Wild Join Date: Aug 2016 Posts: 612	Re: First time Alltrax install.. So I have my CONTROLLER B+ to my MOTOR A2. I would need to swap my CONTROLLER F1 to MOTOR F2 and CONTROLLER F2 to MOTOR F1? Sent from my iPhone using Tapatalk
twilliams81 Gone Wild Join Date: Aug 2016 Posts: 612

11-01-2018, 03:39 PM	#20
twilliams81 Gone Wild Join Date: Aug 2016 Posts: 612	Re: First time Alltrax install.. Yes (about the diode). Scotty is gonna send me one but says it will run without it till then. Sent from my iPhone using Tapatalk
twilliams81 Gone Wild Join Date: Aug 2016 Posts: 612

Similar Threads
Thread	Forum
First time installing an Alltrax XCT 300 Controller	Electric Club Car
Alltrax controller installation time	Electric Club Car
Install time for Jake's Long Travel?	Lifted Golf Carts
Trying to install a 12v Power Inverter fro one time use - Where to connect?	Electric EZGO
Install time?	Electric EZGO