Electronic pedal wiring and conversion

[Sergio]

Originally Posted by jamesrock@me.com

If this is the connection diagram that came with that throttle:

Wiring Diagram Green = Throttle White.
Wiring Diagram Blue = Throttle Green.
Wiring Diagram Yellow = Throttle Blue.
Wiring Diagram Red = Throttle Red.
Wiring Diagram Black = Throttle Black.

[jamesrock@me.com]

Thank you Sergio

[jamesrock@me.com]

Help. Hooked up all wiring and cables. Vehicle does not respond. Solenoid seems to click, but veh does not move. Took some pics. Hope they reveal something that is missing or hooked up wrong
Thanks

[jamesrock@me.com]

Here are some more pics

[fsu1tm]

I believe we have a similar setup although our pedals may be a little different. My wiring is:

Foot Pedal
Yellow Red – Key Switch
Blue – Solenoid Small Terminal +
Green – Alltrax J5
Black – Alltrax B-

[jamesrock@me.com]

I did a complete conversion. The car does not move. The solenoid clicks with no response from power chain. Checked all wiring according to plan all seems to be good. I am going to check the programming on the sr4800. Would appreciate any advice on where the problem would be. Thanks.
I could send more pictures if need

[Sergio]

Don't try random wiring connections or you will fry the pedal and/or Controller.

The colors I gave you were specific to the diagram you posted about the throttle.

Is the reversing contactor clicking?

Please remember that the wiring diagram You posted is not correct for a Reversing contactor with magnetic blowouts, I indicated suggested changes you needed to make in order to correct the wiring.

[mgray70]

Connect the computer with tool kit and check for a throttle signal when you press the pedal. If your not getting a signal then something is wired incorrectly. Does the status light on the Alltrax light up when the solenoid clicks?

Sent from my SM-G930R4 using Tapatalk

[jamesrock@me.com]

Thanks for your response. All good advice. It’s working now. Programming was needed.