|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
06-17-2020, 01:13 PM | #1 |
Not Yet Wild
Join Date: Oct 2013
Location: NH
Posts: 5
|
Yamaha G16 36V upgrades
So I went all out with an alltrax sr600 controller, scottys BIG reverse switch and solenoid. Wired everything in and the only thing that works is the reverse beeper but only when i step on the gas.does not move. Im assuming the wires from the original reverse switch are not used at all??? I was using a combination of the alltrax diagrams and scottys diagrams. I have alot of wires plugged into the small connections on the reverse switch and solenoid. No click from the solenoid at all. A friend of a friend that is into golf carts told me both factory diodes in the original harness are blown. No idea why. It ran fine before I started the upgrades. Please someone help me. Im already late into the season and need to get this to the campground. The only wire that I am really not sure about is the sole pink wire with the bullet connector.
Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha g2 upgrades | Gas Yamaha | |||
Yamaha G16E Limo Upgrades | Members Rides | |||
Yamaha G29 upgrades | Gas Yamaha | |||
Yamaha drive FI upgrades | Gas Yamaha | |||
yamaha G22 speed upgrades | Electric Yamaha |