|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
03-11-2021, 06:59 PM | #1 |
Not Yet Wild
Join Date: May 2020
Posts: 13
|
Need Help Rewiring 1995 Fairway Villager
I have a 1995 Club Car Fairway Villager that I am trying to restore and flip. The F/R mechanical switch is very worn so I thought it would be nice to install a push button FNR switch with a reverse contactor. I have drawn up a schematic and was hoping someone may could look it over and see if I am planning everything correctly. I need to use the stock controller which is a Curtis 1204-411. The solenoid is a Curtis SW80-2028P. I have removed the OBC and am going to utilize a smart charger. The motor is bad and I am planning on replacing it with a compatible D&D motor. Nothing fancy. Anyways, I would really appreciate it if you could look over what I drew out and give me your opinion. Excuse my drawing, I am not an artist and have actually never drawn a schematic. I also only had a limited number of colored pens. Any wire with the color written beside it is a 2 gage and all the others will be at least 14 gage. Thank you in advance, I look forward to hearing from you.
https://drive.google.com/file/d/1AbE...w?usp=drivesdk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-11-2021, 07:24 PM | #2 |
Not Yet Wild
Join Date: May 2020
Posts: 13
|
Re: Rewiring 1995 Fairway Villager
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
96 fairway villager inverter | Gas Club Car | |||
36v to 48v 1983 fairway villager | Electric Club Car | |||
Fairway villager | Golf Carts and Parts | |||
Looking for Fairway Villager Enclosure | Electric Club Car | |||
Wanted 96 CC Fairway Villager Manual | Golf Carts and Parts |