EZGO 2011 TXT controller wiring

[Derekb87]

Hey guys,

my old controller got burned out and im replacing it with a Curtis 1206HB-5201. I'm not the best at reading wiring diagrams and I do not want to make a mistake installing the new controller incorrectly. I did not remove the burnt one so im not sure how it was connected. I need to know what connects to the B- , M- , and B+ terminals on the Curtis controller.


Ezgo TXT 2011 48v shuttle 2+2

I have a green wire coming out of the positive battery terminal into the solenoid and out of the solenoid labeled A1

I have a red wire coming from what looks like the electric motor labeled C

I have another loose green wire that i assume connects to the negative battery terminal labeled cb & bl.

Lastly I have a black wire unlabeled.

I just dont want to fry my new one so any help would be much appreciated.

Thanks

[kgsc]

Here is the diagram for that controller if it is a stock Ezgo

[Derekb87]

I found this wiring diagram that seems to conflict with what you posted.

[kgsc]

Only difference I see is the field wires. Everything else matches. Here is another one..

[Derekb87]

Appreciate the wiring diagrams...unfortunately I think the rebuilt controller came fried.