lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 12-28-2007, 08:36 PM   #1
micjager
Not Yet Wild
 
Join Date: Dec 2007
Posts: 12
Default wiring position on 36 volt motor q.

Hi again its me and you all helped me a lot. My question is does anybody know the wiring post. a1 s2 a2 s1 does it go from the top orange white blue green. green is at the bottom closest to the ground?//////
micjager is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 12-28-2007, 10:42 PM   #2
phasetim
Just me. .
 
phasetim's Avatar
Club Car
 
Join Date: Sep 2007
Location: Pensacola, FL
Posts: 1,092
Default Re: wiring position on 36 volt motor q.

http://www.buggiesgonewild.com/elect...-diagrams.html
phasetim is offline   Reply With Quote
Old 12-28-2007, 11:05 PM   #3
micjager
Not Yet Wild
 
Join Date: Dec 2007
Posts: 12
Default Re: wiring position on 36 volt motor q.

Hi and thanks . the print is to small to see on the a1 a2 s1 s2 to read please tell me the read.
micjager is offline   Reply With Quote
Old 12-28-2007, 11:32 PM   #4
roady89
nimda
Club Car
 
Join Date: Jun 2007
Posts: 13,022
Default Re: wiring position on 36 volt motor q.

89-03 36 volt electric club car wiring diagram with Solid State controller. Cable colors for 36 Volt club Car Motor terminals
S1 Orange
S2 Blue
A1 Green
A2 White
roady89 is offline   Reply With Quote
Old 12-29-2007, 12:00 AM   #5
micjager
Not Yet Wild
 
Join Date: Dec 2007
Posts: 12
Default Re: wiring position on 36 volt motor q.

Thanks roady 89. say the way i have it wired is s1 green a2 blue s2 white a1 orange . and your scm. reads s1 orange a2 white s2 blue a1 green.. i have it reversed. the only thing is it dosnt go if it the other way. am i going to burn out the motor?
micjager is offline   Reply With Quote
Old 12-29-2007, 06:31 AM   #6
roady89
nimda
Club Car
 
Join Date: Jun 2007
Posts: 13,022
Default Re: wiring position on 36 volt motor q.

No, it wont hurt the motor. However, I will say you either have something hooked up wrong somewhere in the system OR at some point in time someone has re-wired it and did NOT wire it to the factory colors.
roady89 is offline   Reply With Quote
Old 12-30-2007, 08:46 PM   #7
micjager
Not Yet Wild
 
Join Date: Dec 2007
Posts: 12
Default Re: wiring position on 36 volt motor q.

Thanks i test drove it today just to see . its good now . thanks for all your help.
micjager is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Wiring Diagram EZ GO 36 volt Electric EZGO
48 Volt Charger Golf Carts and Parts
club car 48 volt motor Electric Club Car
shifter position Lifted Golf Carts
48 volt to 110 volt inverter Golf Carts and Parts


All times are GMT -5. The time now is 11:01 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.