|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
11-16-2016, 09:52 AM
|
#1 |
|
Not Yet Wild
Join Date: May 2015
Posts: 4
|
G14 Pulsar Coil
Can someone show me where the pulsar coil on a G14 is located at? Picture would be great. Rookie status.
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-16-2016, 12:43 PM
|
#2 |
|
Not Yet Wild
Join Date: Nov 2016
Posts: 14
|
Re: G14 Pulsar Coil
I tested mine to the procedure outlined in this post searching the forum.
They are parts of the Magneto. Search you wire diagram as well, it is available here. http://www.buggiesgonewild.com/gas-y...magneto-2.html Checking the pulsar coil (unplug the white/red and white/green wires "can be done at the CDI/harness location, but checking at the wireharness connections out of the engine also will tell you if your harness is bad"), with a volt meter, you should have 14ohms +/- 10%. Also check for continuilty (either wire) to ground, there should not be any. Charge coil-disconnect the brown and black wires, should read 350ohms +/- 10%, also check continuity to ground, there should be none. Hope that helped alittle. |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G1 pulsar coil | Gas Yamaha | |||
| Pulsar coil | Gas EZGO | |||
| G9 Pulsar Coil HELP ME PLEASE!!! | Gas Yamaha | |||
| Pulsar coil | Gas EZGO | |||
| Pulsar coil | Gas EZGO | |||
Linear Mode
