G2/G9 rivets

Rascl93 · 03-26-2012, 10:08 AM

I need some help. I have two carts that are getting a paint job. The first one is all back together except for putting the rubber splash thingys on the rear and behind the pedals and attaching the side pillar covers. Can anyone tell me what size plastic rivets/fasteners I need to attach these. It appears to be a 1/4" size hole, but since I'm going to have to order them online, I'd like to make somewhat sure I order the right thing.

Thanks. :)

spriddle · 03-27-2012, 09:09 AM

You can order them from some of our sponsors. I usually just go back with nice looking bolts and nuts: just like the look better but anything will work.

03-26-2012, 10:08 AM	#1
Rascl93 Not Yet Wild Join Date: Jul 2009 Location: Illinois Posts: 52	G2/G9 rivets I need some help. I have two carts that are getting a paint job. The first one is all back together except for putting the rubber splash thingys on the rear and behind the pedals and attaching the side pillar covers. Can anyone tell me what size plastic rivets/fasteners I need to attach these. It appears to be a 1/4" size hole, but since I'm going to have to order them online, I'd like to make somewhat sure I order the right thing. Thanks. :)

03-27-2012, 09:09 AM	#2
spriddle Admin Join Date: Dec 2006 Location: TN Posts: 101,856	Re: G2/G9 rivets You can order them from some of our sponsors. I usually just go back with nice looking bolts and nuts: just like the look better but anything will work.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Rivets, rivets and more rivets! Sheesh!	Electric EZGO
Exploding rivets	Electric EZGO
Push rivets ?	Gas Yamaha
Plastic rivets	Gas Yamaha
Rivets and such..	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum