|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-03-2012, 09:36 AM | #1 |
Getting Wild
Join Date: Feb 2012
Location: SW Michigan
Posts: 147
|
Starter brush replacement
I just ordered replacement brushes for my starter. Any tips, tricks or help on would be greatly appreciated. My brushes should be here tomorrow or thursday and hope to get them in right away
Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-03-2012, 12:42 PM | #2 |
LIFE IS TAKING FOREVER
Join Date: Apr 2010
Location: DANSVILLE NY
Posts: 5,327
|
Re: Starter brush replacement
Ive done 4 of them Rob and they are very easy but then again very dirty inside. You shouldnt have any problem changing them out. I took mine all apart to clean everything inside.
|
04-03-2012, 02:21 PM | #3 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Starter brush replacement
Yes Rob, Tommy rebuilds carts and then leaves them all over the country!!lhmo::
|
04-03-2012, 02:26 PM | #4 |
LIFE IS TAKING FOREVER
Join Date: Apr 2010
Location: DANSVILLE NY
Posts: 5,327
|
Re: Starter brush replacement
Thanks Mike. I make sure they have a good home. No golf cart wants to have a sad life.
|
05-19-2012, 08:57 PM | #5 |
Not Yet Wild
Join Date: May 2011
Posts: 2
|
Re: Starter brush replacement
Any more detail is helpful. I will be replacing brushes because I have a 'dead spot' in the starter/generator. The unit is mounted with a single bolt and a tensioner? How does the cover come off?
|
05-21-2012, 05:59 AM | #6 |
LIFE IS TAKING FOREVER
Join Date: Apr 2010
Location: DANSVILLE NY
Posts: 5,327
|
Re: Starter brush replacement
there are long bolts that go through the starter. Take them out and it should come apart.
|
05-21-2012, 11:59 AM | #7 |
Gone Wild
Join Date: Jun 2009
Location: Oroville, WA --about 7 miles south of Canada.
Posts: 1,233
|
Re: Starter brush replacement
I'm getting set to put new brushes in mine also. While it's apart give the armature (the part the brushes rub against) a light sanding with FINE sandpaper to take the glaze off. And clean between sections (the grooves) on the armature as well.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Starter/Generator brush replacement tips? | Gas Yamaha | |||
Help,cart runs like crap after starter/generator brush replacement | Gas Yamaha | |||
Starter Not Working? Brush Replacement | Gas Club Car | |||
brush replacement | Electric EZGO | |||
G1 starter brushes and 2 brush springs for sale. | Golf Carts and Parts |