|
01-14-2020, 09:00 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2014
Posts: 31
|
Rattle can Painting metal bodies?
90% of the posts regarding painting is related to newer plastic bodies. Any advise, steps for those of us with metal?
I’ve done all of my research so far by watching videos on automotive painting which I believe would be similar. I have a 95 Medalist that I have all the body panels off of. I’ve sanded the inspection panel and the front cowl with 280 grit and have flattened out a few dents so far. Sent from my iPhone using Tapatalk |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-15-2020, 01:25 AM
|
#2 |
|
Gone Insane
 Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,214
|
Re: Rattle can Painting metal bodies?
Exactly like painting a car as far as I'm concerned.
I would rather work with metal or fiberglass anytime. |
|
|
|
|
01-15-2020, 07:31 AM
|
#3 |
|
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: Rattle can Painting metal bodies?
Yep, treat it as you would a metal body car.
|
|
Ron
 PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| prep work for painting plastic bodies | Body and Paint | |||
| Adhesion promoter for painting golf cart bodies | Body and Paint | |||
| Painting golf cart bodies | Design Center | |||
| Other bodies.. | Electric EZGO | |||
| bodies and top | Golf Carts and Parts | |||
Linear Mode
